Model NO.: TPMM
Type: HU1
Balance: Balanced
Trademark: Viasia
Transport Package: Woodencase with Pallet
Specification: 1130*8308*1650mm
Origin: China
HS Code: 84774010
Model NO.: TPMM
Type: HU1
Balance: Balanced
Trademark: Viasia
Transport Package: Woodencase with Pallet
Specification: 1130*8308*1650mm
Origin: China
HS Code: 84774010
PTFEÂ has outstanding properties such as high temperature resistance, corrosion resistance, non-stickiness, self-lubrication, excellent dielectric properties and low coefficient of friction. Used as engineering plastics, it can be made into PTFE tubes, rods, strips, plates, films, etc. It is generally used in corrosion-resistant pipes, containers, pumps, valves, radar and high-frequency communication equipment with high performance requirements. Â Adding any filler that can withstand the sintering temperature of PTFE Â can greatly improve the mechanical properties while maintaining other excellent properties of PTFE. The filled varieties include glass fiber, metal, metal oxide, graphite, molybdenum disulfide, carbon fiber, polyimide, EKONOL, etc., and the wear resistance and ultimate PV value can be increased by 1000 times.
Â
| Product Capacity |
1000-1500pcs/hour |
| Machine Size |
1130*8308*1650mm (adjustable according to your requirements) |
| Machine Weight |
800kgs |
| Suit for OD |
2-50mm |
| Suit for Thickness |
2-8mm |
| Thickness Tolerance |
0.03-0.1mm |
| Main Motor |
1.5kw |
The machine can produce PTFE gaskets, PTFE washers, PTFE seats, PTFE o-rings, electronic insulators etc.
1. The design is ergonomic and modern due to the panel powder coating.
2. The machine is equipped with cooling systems that keep the working temperature around
23Â degrees for a safe and stable operation.
3. One person can manage 10-15 sets PTFE molding machine as it is fully automatic. 4. PLC and touch screen make it easy to operate the machine.Â
5. The machine stops automatically when the target quantity is produced.
6. The machine stops automatically when it runs out of powder in a big barrel.
7. The machine fully covers the raw material for PTFE that protects it from pollution by the dust etc.
|
PTFEÂ has outstanding properties such as high temperature resistance, corrosion resistance, non-stickiness, self-lubrication, excellent dielectric properties and low coefficient of friction. Used as engineering plastics, it can be made into PTFE tubes, rods, strips, plates, films, etc. It is generally used in corrosion-resistant pipes, containers, pumps, valves, radar and high-frequency communication equipment with high performance requirements. Â Adding any filler that can withstand the sintering temperature of PTFE Â can greatly improve the mechanical properties while maintaining other excellent properties of PTFE. The filled varieties include glass fiber, metal, metal oxide, graphite, molybdenum disulfide, carbon fiber, polyimide, EKONOL, etc., and the wear resistance and ultimate PV value can be increased by 1000 times.
Â
| Product Capacity |
1000-1500pcs/hour |
| Machine Size |
1130*8308*1650mm (adjustable according to your requirements) |
| Machine Weight |
800kgs |
| Suit for OD |
2-50mm |
| Suit for Thickness |
2-8mm |
| Thickness Tolerance |
0.03-0.1mm |
| Main Motor |
1.5kw |
The machine can produce PTFE gaskets, PTFE washers, PTFE seats, PTFE o-rings, electronic insulators etc.
1. The design is ergonomic and modern due to the panel powder coating.
2. The machine is equipped with cooling systems that keep the working temperature around
23Â degrees for a safe and stable operation.
3. One person can manage 10-15 sets PTFE molding machine as it is fully automatic. 4. PLC and touch screen make it easy to operate the machine.Â
5. The machine stops automatically when the target quantity is produced.
6. The machine stops automatically when it runs out of powder in a big barrel.
7. The machine fully covers the raw material for PTFE that protects it from pollution by the dust etc.
|
Injection Charger Base Accessories
The design theme of the accessories for the injection charger base is the product design and mold design of the universal charger base, which is designed for the production of injection mold. Plastic parts
The preliminary analysis of the structure shows that the sprue and the sequence type, the structure and the adoption of a two-cavity mold are due to the large area of plastic parts. Due to the structural characteristics of plastic parts, it needs to use inclined sliding traction mechanism. The specific design process is as follows: first, the performance analysis of the plastic injection molding process. This includes analysis of the structural dimensions of the material properties of the plastic parts and molded plastic parts. Second, it is the choice of how to inject a reasonable machine. Choosing the right injection molding machine is the foundation of this design. Again, this is in the form of the mold structure preparation. The form structure of the mold must be calculated and a reasonable choice is based on the dimensions of the structure. The fourth step is to design the pouring system.
The fifth step is such a design in the design and mold parts of the calculation focus. The sixth step is to draw the sliding cover design of the oblique profile and the calculation of the core mechanism.
Injection Charger Base Accessories,Iphone Charger Base,Black Injection Molding,Injection Molding Machine
Timeplex Industrial Limited , https://www.timeplexhks.com