China's first high-pressure melamine plant test successfully
There are two types of Sodium carboxymethyl cellulose, alkaline and neutral, depending on the application. Alkaline, industrial low viscosity (2% aqueous solution) 0.2~0.5Pa·s; neutral, industrial medium viscosity (2% aqueous solution) 0.3~0.6Pa ·S, industrial high viscosity (2% aqueous solution) 0.8~1.0Pa·s.
It's widely used in oil industry drilling mud treatment agent, synthetic Detergent, organic builder, textile printing and dyeing sizing agent, daily-use chemical products water-soluble colloidal tackifier, tackifier and emulsifier for pharmaceutical industry, and food industry Thickener, adhesive for ceramic industry, industrial paste, sizing agent for paper industry, etc. Used as flocculant in Water Treatment, mainly used for wastewater sludge treatment, can increase the solid content of filter cake.
Carboxy Methyl Cellulose,CMC Thickener,CMC Sodium HENAN JINHE INDUSTRY CO.,LTD , https://www.hntitaniumdioxide.com
Jianfeng Chemical's melamine project has a total investment of 580 million yuan and the construction period lasted more than two years. The device is manufactured by the high-pressure process of the Italian-European company and designed and manufactured by Bluestar Machinery. The device has high requirements on material quality, and all 25-22-2 and 316Lmod stainless steel materials imported from abroad must be used. The decomposing tower heat exchanger, ammonia evaporator, high-pressure passivation air tank, and first-grade concentration heat exchanger must be installed. The complex processes of the stripper reboiler and the exhaust gas condenser are difficult to manufacture. Bluestar Machinery took advantage of the “Provincial Technology Center†platform to fully absorb and digest foreign advanced technology and overcome various difficulties. It delivered this batch of products on schedule in May 2007 and was recognized by customers.
After the operation of this device, the condition is stable, and the produced melamine is of good quality and high purity. The construction cost of the entire device is more than 50% lower than that of imported devices of the same type.