Engine: Jichai Engine or Chargewe Engine
Application Area: Industry Project, Hospital, Hotel, etc
Alternator: Meccalte, Marathon, Leroy Somer
Controller: Deif, Cmap, Deepsea, etc
Option Type: Container, CHP, Cchp, Heat Recovery
Control System: Germany Motortech
Frequency: 50Hz/60Hz
Rated Voltage: 230V/220V/400V/440V/6.3kv/10.5kv
Phase: 3p4w
Trademark: Jichai engine, Chargewe brand or OEM brand
Transport Package: Plastic Membrane(Film) Packing or Carton Box Ect.
Specification: CE, ISO, BV
Origin: Shandong, China
HS Code: 8502200000
Applied gas:
Natural Gas, Biogas, City Sewage Gas, Landfill gas, Oil gas, farm biogas, Coal mine gas,etc
Acceptable working conditions:Ambient temperature : -10°C~+40°CÂ
(antifreeze or preheater needed for below 0°C)
Relative humidity:<90%(20°C)
Altitude:≤1000m
Normal working conditions:
Genset can run at rated power on the conditions:
Atmospheric Pressure: 100kPa, Ambient Temp: 20°C, Relative Humidity: 30%.
Â
Standard Scope of Supply:1. Brand new gas engine, 90% parts include engine body , crank shaft, cam shaft, piston, cylinder head, etc with best quality
2. Brand new brushless France Meccalte,Leroy Somer,Stamford alternator
3. Rating: 3 phases 4 lines. 400/230V, 50 HZ/60HZ , 1500rpm/1200rpm/1000rpm, 0.8PF, IP22-23, Insulation class H (60Hz 1200RPM option)
4. Radiator for 40°C/50°C ambient temperature
5. Ignition system adopted Germany Motortech
6. Emergency stop mounted
7. Battery,Battery cable and Battery charger
8. Standard tool box
9.Standard Accessory for installation (include bellows,silencer,flange,asbestos pad,Anti-rust water,screw )
10.Gas Train include Regulator valve,Electromagnetic Valve, Fire arrestor,Ball Valve (Chinese brand)
Â
Accessories list1. Maintenance Operation manual
2. Quality certificate, Gen-sets ex-factory testing report
Â
Optional: 1. Sound-proof / Container canopy
2. CHP & CCHP system
3. Grid parallel system
4. Remote radiator or horizontal type radiator
5. Auto oil filling system
6. Water heater
7. Oil heater
8. Gas leaking detector
9. Flame detector
10.Gas scrubber
Â
Gas generator key benefits
Cost-effective power generation
Flexibility to quickly ramp power supply up or down
Exceptional performance and reliability
Reduced environmental impact
Combined heat and power provision
24/7, turn-key service
Reduced environmental impactChaiwei Power natural gas generators adopt Jichai or Weichai or Chargewe brand gas engines. These heavy-duty, spark-arrested, turbo-charged, after-cooled engines have a purpose built alternator which is suitable for continuous operation in hash environments. The patented fuel system and advanced engine design ensure emission regulations are met as they are highly efficient with a virtually smoke free operation.
Compared to diesel generators, gas generators have a much lower sulphur, NOx and greenhouse gas emission content.
Combined Heat and Power (CHP) benefitsChaiwei Power gas power solution allows customers to use heat generated by the natural gas powered units, to produce hot water for the customers own CHP units. This can be vital in many processing environments in creating added saving for the customer. This facility supports combined heat and power
Strategies, without the need for long term capital investment in new plant.
Â
Requirement for Coal mine/bed gas
Within 1m to the intake valve of gas generator set1.    Gas temperature≤40°C
2.    Pressure 3-20kpa, pressure changing rate≤1kpa/min
3.    H2S≤200mg/Nm³
4.    If the CH4 content less than 30%, the total content of CH4 and O2 should not less than 28%, the content of O2 should not less than 16%.
5.    Moisture content≤40g/N m³
6.    Impurity particle size≤5μm, impurity content≤30mg/N m³
Â
If there are too much sulfur and ammonia in the gas, it will not only corrode the electrode of sparking plug seriously but also increase the acid value of engine oil which will corrode the parts inside of genset, easy to generation sediment and increase the attrition corrosion to the engine.
Â
Â
Main Specification of Generator Set
Model No. |
Engine No. |
Rated Power |
Rated Voltage |
Rated Frequency |
SIZE (MM) |
Net Weight |
500GF-WK |
G12V190ZLDW-2 |
500kw |
400/230v |
50/60Hz |
5600 * 2040 * 2780 |
11800kg |
500GF-WKI |
G12V190ZLDW-2 |
500kw |
400/230v |
50/60Hz |
5600 * 2040 * 2780 |
11800kg |
600GF-WKI |
G12V190ZLDW-3 |
600kw |
400/230v |
50/60Hz |
5600 * 2040 * 2780 |
11800kg |
Â
Â
Main Specification of Engine
Engine No. |
Rated Power |
Rated Speed |
Pressure  Ratio |
Cylinder No. |
SIZE |
Net weight |
G12V190ZLDW-2 |
500kw |
1000r/min |
8:1 |
12 60°Vce |
5251×1970×2235 |
5300kg |
G12V190ZLDW-3 |
600kw |
1000r/min |
8:1 |
12 60°Vce |
5251×1970×2235 |
5300kg |
Main Technical Parameter
Type |
4 Stroke, Water-Cooling, Supercharger intercooling, Direct injection |
Cylinder Diameter |
190mm |
Stoke |
210mm |
Crankshaft Rotation |
Anticlockwise (face to output terminal) |
Starting Mode |
Pneumatic Motor, Electric Motor |
Lubricant Mode |
Pressure and Splash Lubricant |
Ignition Mode |
Plug Ignition |
Heat Consumption |
≤11386kj/kw.h |
Lubricant Consumption |
≤1.6g/kw.h |
Steady Speed Regulation Rate |
0 - 5%Â adjustable |
Speed regulation mode |
Electronic Speed Regulation |
Exhaust temperature |
<=650ºC |
Â
Please feel free to contact us and visit our factory !
Contact Person:Judy
Shandong Chaiwei Power Equipment Co., Ltd
Add: No.001 Airport west road, Lingang ED Zone, Jinan City,Shandong Province,China
Tel:0086-531-88685050
Fax:0086-531-88882223
Mob:0086-18615225710
Web: www.cn-generator.com
Â
Round Molded Graphite
As the name implies, Round Molded Graphiteis a cylindrical product of graphite electrode, which is made of graphite block materials by crushing, screening, batching, shaping, cooling, roasting, dipping and graphitization of post section petroleum coke and medium temperature coal tar pitch. It has the advantages of high temperature resistance, corrosion resistance, good conductivity and light weight. It is mainly used for large DC resistance furnaces, blast furnace bricks, conductive electrodes, lining anti-corrosion and other purposes.
The high-purity graphite, graphite block and Molded Graphite produced by Pingdingshan Carbon Graphite Factory for many years are excellent, and the specifications of Round Molded Graphite are as follows: φ 450*800, φ 520*400 φ 630*420, φ 660*620 φ 780*600, φ 820*350~500 φ 900*350~400, φ 1050*350~400 φ 980~350*400, φ 1160*350~680 φ 1260*350~680, φ 1330*400 φ 1420*400, φ 1520*400 φ 1630*350, φ 1800*350 φ 2000*350, φ 520~2000*680
Round Rod Graphite,Graphite Round Stock,Round Molded Graphite,Graphite Round Square Shape
Henan Carbon Road New Material Technology Co., Ltd , https://www.kyisostaticgraphites.com