Coal analyzer working principle and use method
Unwinding and Rewinding Machine
Unwinding and Rewinding Machine
Flying Man automatic unwinding and rewinding machine is widely applied in laminating, slitting and die cutting for shield materials, sticky materials, insulating materials, conductive materials, electronic materials, such as paper rolls, label rolls, film rolls, PVC rolls, mylar rolls, foil rolls, foam rolls, copper foils. and etc.
Foil Winding Machine,High Speed Winding Machine,Electric Motor Winding Machine Suzhou Flying Man Assembly Automation Co., Ltd. , https://www.flyingmans.com
After the air in the working room is heated by the electric heater, it is forced to circulate through the fan, and uniform heat exchange with the heated object is performed in the work area, and a road is baked or dried.
Instructions:
1. Open the door, put the items to be heat treated into the shelf on the box, pipe the door, and twist the exhaust valve on the control panel to half (the temperature of the dried product is appropriate at any time during the heating process. Adjustment).
2. Turn on the power supply that is consistent with the requirements of this equipment, and ground the grounding terminal of the power supply socket used.
3. Turn on the power switch, power indicator, etc., and the temperature control meter starts to display the temperature of the studio.
4. There are two heating switches, if you need a lower temperature to turn on heating 1, then turn on heating at a higher temperature and simultaneously heat up.
5. According to the needs of the heated object, turn the temperature setting button on the temperature controller (or press the DIP switch) to set the temperature, and the drying oven starts heating.
6. After the work is completed, turn off the heating switch 1, the heating switch 2, and the power switch. 