Detergent Coal Ash Turning Machine Nonferrous Metal Dry Dust Collector

December 06, 2018

Model NO.: CNPC
Air Volume: 5000 - 120200 M3 / H
Filter Area: 96 - 1728 M2
Filter Rate: 0.8 - 1.2 M/Min
Material: Q235 Steel
Equipment Resistance: 1200PA
Equipment Under Negative Pressure: < 6000PA
Particle Concentration: <100G/M3
Dust Emission Concentration: <20mg
Dedusting Type: Offline Pulse Cleaning
Compressed Air: 0.5 - 0.7 MPa
Trademark: CNP
Transport Package: Nude
Specification: customization
Origin: China
HS Code: 84213900
Model NO.: CNPC
Air Volume: 5000 - 120200 M3 / H
Filter Area: 96 - 1728 M2
Filter Rate: 0.8 - 1.2 M/Min
Material: Q235 Steel
Equipment Resistance: 1200PA
Equipment Under Negative Pressure: < 6000PA
Particle Concentration: <100G/M3
Dust Emission Concentration: <20mg
Dedusting Type: Offline Pulse Cleaning
Compressed Air: 0.5 - 0.7 MPa
Trademark: CNP
Transport Package: Nude
Specification: customization
Origin: China
HS Code: 84213900

Detergent coal ash turning machine nonferrous metal dry dust collector

Introduction
Our bag type filter is a kind of small and medium-sized pulse jet dust collector. The most high efficient dust removal for your dust prevention circumstance. To adopt pulse blowing dedust and PLC controller, the automatic working can be come true. The advantage is reliable operation, easy maintenance and management. Through our design program and every kind of detectors signal, we can see every parts of the equipment during it working.   Our dust collector equipment often can be widely used in cement, metallurgy, electric power, chemical and other industries of dust gas purification and fine powder material recycling collection.
Structure Composition

The customized dust catcher are composed by the filter chamber housing, clean air chamber enclosure, filter bag, filter cage, pulse injection device, ash hopper, screw conveyor and discharger, etc. At the end, it needs centrifugal fan for power system. In another type of dust catcher, the dedusting job can be done by every chamber isolation. The every chamber of the pulse and soot cleaning cycle by soot cleaning program controller.

Detergent Coal Ash Turning Machine Nonferrous Metal Dry Dust Collector

Specification
Note: The sheet just for your reference, we can supply custom service.
 

Type  Air Volume
  (m3/h)		 Filter Bag Qty(Pcs) Filter speed (m/min) Filter Bag Size(mm)  Chamber
(Pcs)		 Dust Collector Size Dust Collector Weight (KGS) Shipment  Volume(M3) Compressed Air
Required (m3/min)
CNPC32-4 7680 128 1 130 X 2500 4 / 32 2214 X 2720 X 6300 4080 28.72 0.35
CNPC32-5 9600 160 5 / 32 2214 x 3280 x 6800 5280 38.00 0.45
CNPC32-6 11520 192 6 / 32 2214 X 4000 X 7500 6480 48.40 0.55
CNPC64-4 15360 256 4 / 64 2478 X 4800 X 7400 6900 62.44 1.20
CNPC64-5 19200 320 5 / 64 2478 x 6040 x 7400 8800 85.00 1.50
CNPC64-6 23040 384 6 / 64 2478 x 7260 x 7500 9700 106.00 1.80
CNPC64-7 26880 448 7 / 64 2478 x 8480 x 7500 11800 128.00 2.10
CNPC64-8 30720 512 8 / 64  2478 x 9700 x 7500 13000 142.88 2.40
CNPC80-4 19200 320 4 / 80 2020 X 4720 X 7042 X 1
800 X 4720 X 926 X1           		 8125 79.83 1.20
CNPC80-5 24000 400 5 / 80 2020 x 6000 x 7042 x 1     
800 x 6000 x 1120 x 1		 10160 95.48 1.50
CNPC80-6 28800 480 6 / 80 2020 X 7160 X 7042 X 1 
800 X 7160 X 1120 X 1		 12200 111.12 1.80
CNPC80-7 33600 560 7 / 80 2020 x 8400 x 7042 x 1     
920 x 8400 x 1620 x 1		 14234 134.08 2.10
CNPC80-8 38400 640 8 / 80 2020 X 9600 X 7042 X 1  
920 X 9600 X 1820 X 1		 16267 157.05 2.40
CNPC80-9 43200 720 9 / 80 2020 X 10860 X 7042 X 1  
920 X 10860 X 1820 X 1		 18300 178.04 2.70
CNPC-80-4x2 38400 640 4 / 80 X 2 2020 x 4720 X 7042 X 2
1126 X 4720 X1226 X 1         		 16250 160.00 2.40
CNPC-80-5x2 48000 800 5 / 80 X 2 2020 x 6000 x 7042 x 2       1220 x 6000 x 1200 x 1 20320 200.00 3.00
CNPC80-6x2 57600 960 6 / 80 X 2 2020 X 7160 X 7042 X 2
1220 X 7160 X 1320 X 1		 24400 230.68 3.60
CNPC80-7x2 67200 1120 7 / 80 X 2 2020 x 8400 x 7042 x 2   
1620 x 8400 x 1720 x 1		 28468 265.00 4.20
CNPC80-8x2 76800 1280 8 / 80 X 2 2020 X 9600 X 7042 X 2
1720 X 9600 X 1820 X1		 32533 287.06 4.80
CNPC80-9x2 86400 1440 9 / 80 X 2 2020 X 10860 X 7042 x 2 
1720 X 10860 X 1820 X 1		 36600 354.31 5.40

Business Operation

Details of our business operation

 We will beginning our service upon received your dust collection requirement. According to your detailed requirement, we will design the dust collector to suit for your circumstance.

Detergent Coal Ash Turning Machine Nonferrous Metal Dry Dust Collector

In another words, for every customer, we will customized the equipment for every differenct circumstance application. 

Detergent Coal Ash Turning Machine Nonferrous Metal Dry Dust Collector
As usual, according to the detailed dust collection circumstance Analysis, we can assure our equipment building material the mostly suitable (matching) for application. So that, One set of equipment can be used for more than 10 - 20 years. Even more, under good maintaice, It can support for 30 years operation. 

Detergent Coal Ash Turning Machine Nonferrous Metal Dry Dust Collector

Working Occasion

Please see the following working circumstance. For more other detailed application not appear in the following picture , please be sure to send us e-mail with your questions. We will try our best to answer them for you. Hope that we can give you more professional suggestion for reference.

Detergent Coal Ash Turning Machine Nonferrous Metal Dry Dust Collector

Company Information

CNP Co., Ltd. was founded in 2008, specializes in the field of air pollution control and bag filters. Including engineering design, planning, consulting, equipment research and development, manufacturing, sales, installation and commissioning, as well as production and services.

Based on the high starting point, CNP Co., Ltd., with a positive and upward pioneering spirit, will further create brilliancy as to technological innovation, intellectual property rights and independent brand strategy.

Our Services

It is appreciated that provide us more information when you enquiry, thanks!

1. Enquiries quickly reply within 24 hours.

2. After-sales service, rapid response, the engineer installation guide. The feedback problems will be replied within 24 hours. If any problem, We will arrange professional engineers within 48 working hours to solve it.

3.We have good faith principle. we will sure the products is high quality before shippment.
Detergent Coal Ash Turning Machine Nonferrous Metal Dry Dust Collector

Detergent coal ash turning machine nonferrous metal dry dust collector

Introduction
Our bag type filter is a kind of small and medium-sized pulse jet dust collector. The most high efficient dust removal for your dust prevention circumstance. To adopt pulse blowing dedust and PLC controller, the automatic working can be come true. The advantage is reliable operation, easy maintenance and management. Through our design program and every kind of detectors signal, we can see every parts of the equipment during it working.   Our dust collector equipment often can be widely used in cement, metallurgy, electric power, chemical and other industries of dust gas purification and fine powder material recycling collection.
Structure Composition

The customized dust catcher are composed by the filter chamber housing, clean air chamber enclosure, filter bag, filter cage, pulse injection device, ash hopper, screw conveyor and discharger, etc. At the end, it needs centrifugal fan for power system. In another type of dust catcher, the dedusting job can be done by every chamber isolation. The every chamber of the pulse and soot cleaning cycle by soot cleaning program controller.

Detergent Coal Ash Turning Machine Nonferrous Metal Dry Dust Collector

Specification
Note: The sheet just for your reference, we can supply custom service.
 

Type  Air Volume
  (m3/h)		 Filter Bag Qty(Pcs) Filter speed (m/min) Filter Bag Size(mm)  Chamber
(Pcs)		 Dust Collector Size Dust Collector Weight (KGS) Shipment  Volume(M3) Compressed Air
Required (m3/min)
CNPC32-4 7680 128 1 130 X 2500 4 / 32 2214 X 2720 X 6300 4080 28.72 0.35
CNPC32-5 9600 160 5 / 32 2214 x 3280 x 6800 5280 38.00 0.45
CNPC32-6 11520 192 6 / 32 2214 X 4000 X 7500 6480 48.40 0.55
CNPC64-4 15360 256 4 / 64 2478 X 4800 X 7400 6900 62.44 1.20
CNPC64-5 19200 320 5 / 64 2478 x 6040 x 7400 8800 85.00 1.50
CNPC64-6 23040 384 6 / 64 2478 x 7260 x 7500 9700 106.00 1.80
CNPC64-7 26880 448 7 / 64 2478 x 8480 x 7500 11800 128.00 2.10
CNPC64-8 30720 512 8 / 64  2478 x 9700 x 7500 13000 142.88 2.40
CNPC80-4 19200 320 4 / 80 2020 X 4720 X 7042 X 1
800 X 4720 X 926 X1           		 8125 79.83 1.20
CNPC80-5 24000 400 5 / 80 2020 x 6000 x 7042 x 1     
800 x 6000 x 1120 x 1		 10160 95.48 1.50
CNPC80-6 28800 480 6 / 80 2020 X 7160 X 7042 X 1 
800 X 7160 X 1120 X 1		 12200 111.12 1.80
CNPC80-7 33600 560 7 / 80 2020 x 8400 x 7042 x 1     
920 x 8400 x 1620 x 1		 14234 134.08 2.10
CNPC80-8 38400 640 8 / 80 2020 X 9600 X 7042 X 1  
920 X 9600 X 1820 X 1		 16267 157.05 2.40
CNPC80-9 43200 720 9 / 80 2020 X 10860 X 7042 X 1  
920 X 10860 X 1820 X 1		 18300 178.04 2.70
CNPC-80-4x2 38400 640 4 / 80 X 2 2020 x 4720 X 7042 X 2
1126 X 4720 X1226 X 1         		 16250 160.00 2.40
CNPC-80-5x2 48000 800 5 / 80 X 2 2020 x 6000 x 7042 x 2       1220 x 6000 x 1200 x 1 20320 200.00 3.00
CNPC80-6x2 57600 960 6 / 80 X 2 2020 X 7160 X 7042 X 2
1220 X 7160 X 1320 X 1		 24400 230.68 3.60
CNPC80-7x2 67200 1120 7 / 80 X 2 2020 x 8400 x 7042 x 2   
1620 x 8400 x 1720 x 1		 28468 265.00 4.20
CNPC80-8x2 76800 1280 8 / 80 X 2 2020 X 9600 X 7042 X 2
1720 X 9600 X 1820 X1		 32533 287.06 4.80
CNPC80-9x2 86400 1440 9 / 80 X 2 2020 X 10860 X 7042 x 2 
1720 X 10860 X 1820 X 1		 36600 354.31 5.40

Business Operation

Details of our business operation

 We will beginning our service upon received your dust collection requirement. According to your detailed requirement, we will design the dust collector to suit for your circumstance.

Detergent Coal Ash Turning Machine Nonferrous Metal Dry Dust Collector

In another words, for every customer, we will customized the equipment for every differenct circumstance application. 

Detergent Coal Ash Turning Machine Nonferrous Metal Dry Dust Collector
As usual, according to the detailed dust collection circumstance Analysis, we can assure our equipment building material the mostly suitable (matching) for application. So that, One set of equipment can be used for more than 10 - 20 years. Even more, under good maintaice, It can support for 30 years operation. 

Detergent Coal Ash Turning Machine Nonferrous Metal Dry Dust Collector

Working Occasion

Please see the following working circumstance. For more other detailed application not appear in the following picture , please be sure to send us e-mail with your questions. We will try our best to answer them for you. Hope that we can give you more professional suggestion for reference.

Detergent Coal Ash Turning Machine Nonferrous Metal Dry Dust Collector

Company Information

CNP Co., Ltd. was founded in 2008, specializes in the field of air pollution control and bag filters. Including engineering design, planning, consulting, equipment research and development, manufacturing, sales, installation and commissioning, as well as production and services.

Based on the high starting point, CNP Co., Ltd., with a positive and upward pioneering spirit, will further create brilliancy as to technological innovation, intellectual property rights and independent brand strategy.

Our Services

It is appreciated that provide us more information when you enquiry, thanks!

1. Enquiries quickly reply within 24 hours.

2. After-sales service, rapid response, the engineer installation guide. The feedback problems will be replied within 24 hours. If any problem, We will arrange professional engineers within 48 working hours to solve it.

3.We have good faith principle. we will sure the products is high quality before shippment.
Detergent Coal Ash Turning Machine Nonferrous Metal Dry Dust Collector

PU Seal

PU Seal,Polyurethane Sealant ,Polyurethane Caulk ,Urethane Sealant

Auto Steering Systems Co., Ltd. , http://www.shieldseal-manufacturer.com