Diversification is the only way to automate packaging machinery
According to the different production methods of calcium carbonate, calcium carbonate can be divided into Heavy Calcium Carbonate, light calcium carbonate, colloidal calcium carbonate and crystalline calcium carbonate. White solid, tasteless and odorless. There are two forms of amorphous and crystalline. The crystal type can be divided into orthorhombic crystal system and hexagonal crystal system, which are columnar or diamond-shaped.
Calcium carbonate is widely used in filling polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), acrylonitrile butadiene-styrene copolymer (ABS) and other resins. The addition of calcium carbonate has a certain effect on improving certain properties of plastic products and expanding their application range. In plastic processing, they can reduce resin shrinkage, improve rheology, and control viscosity. It can also play the following roles: Calcium Carbonate,Calcium Carbonate, Light Calcium Carbonate Henan Shunbang Chemical Industry CO.,Ltd , https://www.sblubricant.com
The diversified medical products with mechanical functions have been trending toward refinement and diversification. The number of single-species, high-volume products has become less and less, and products with many varieties and small batches have increasingly become mainstream. Under the changing trend of the big environment, a diversified, multi-switching function that can adapt to a variety of packaging materials and mold replacement packaging machine can adapt to the needs of the market. For example, in a blister packaging machine, both "aluminum" and "aluminum" packaging can be carried out, and it is required that the switching is simple, and that less molds need to be replaced. At present, the time for changing the mold is generally 1 to 2 hours. Such a long time cannot meet the production requirements of many varieties and small batches.
Structural Design Standard Modularization For traditional industrial design, if you want to introduce a new model, you need to do a lot of heavy work, but also rely on new equipment to recover the high design costs, thus driving up the price of new models. The design of the future should adopt the design concept of standardization and modularization. It can make full use of the original organic modular design. It can be converted into a new model in a short time, and the price of the new model can be controlled within a reasonable range. Inside.
The intelligent control system for control functions is the brain of the mechanical equipment and is the core device for issuing motion instructions. Currently, pharmaceutical packaging machinery manufacturers generally use programmable controllers (PLC controllers), which do not have the powerful functions of industrial PCs. For most conventional mechanical control devices, the use of a PLC is appropriate because there are a limited number of control parameters that need to be controlled mechanically in many places. For example, torque control uses mechanical clutches to overload the motor. However, with the increase in the degree of automation of the equipment, more and more computer-controlled devices, the number of various sensing components, detection components, control components, and actuators applied to the device is very large. At this time, PLC cannot do so much. The parameters are managed and controlled, and the industrial PC will be the best choice.
Every manipulator of a truly modern packaging machine should be controlled by a computer and have a high resolution of material and thickness. It can be seen that improving the automation level and quality level of the entire packaging chain is a very important part of modern pharmaceutical companies to implement GMP regulations.
(1) Improve the dimensional stability of plastic products;
(2) Improve the hardness and rigidity of plastic products;
(3) Improve plastic processing performance;
(4) Improve the heat resistance of plastic products;
(5) Improve the astigmatism of plastics;
(6) It can make the product have some special properties;
(7) Reduce the cost of plastic products.