Double Layer Roll Forming Corrugation Machine
According to the regulations of the State Grid, the proportion of distributed generation such as photovoltaics and wind power cannot exceed 10% of the grid, and the energy storage system must be added if it exceeds. Since photovoltaic systems and wind power systems do not use energy storage systems when they are connected to the grid for power generation, it will bring some adverse effects to the power grid. These effects become impossible to ignore. Through the analysis of the characteristics of photovoltaic power generation, it can be seen that the influence of photovoltaic power generation system on the power grid is mainly caused by the instability of photovoltaic power supply. The demand for energy storage systems has increased over the years.
The stable operation of the energy storage system is related to the safety and stability of the power grid, so the major energy storage system manufacturers attach great importance to its quality, and among the factors affecting the stability of the energy storage system, the heat dissipation performance is undoubtedly the most important. Trumony focuses on high-power heat dissipation and has rich experience in the R&D and manufacturing of heat sinks for energy storage systems. Trumony`s thermal management engineers can provide heat dissipation solutions from the beginning of the design of the energy storage system, and can also provide cooling solutions for energy storage systems. The system is optimized for thermal performance. By accumulating rich thermal design data, Trumony can provide accurate thermal simulation and thermal management test data.
snake tube for ESS,snake tube for energy storage,serpentine tube for battery pack Trumony Aluminum Limited , https://www.szaluminumpipe.com
  china manufacturer
Â
1. the advantage of double roof sheet forming machine
it has reasinable structure, beautiful appearance, with advantage of saving space, easy operate and especially welcomed by the costomer with limit area or site operation.
2. Main Parameter and specification of the double roof sheet forming machine
We design each machine according to user requirement. Below techinical parameters can be adjusted if needed.
Configurations: 5t manual uncoiler, forming machine, cutter, hydraulic system, controller, output table
No.
Main parameter of 836+836
 IBR and corrugaed double layer roll forming machineÂ
1
Suitable to process
Color steel plate
2
Width of the plate
1000MM+1000MM
3
Thickness of the plate
0.3-0.8mm
4
De-coilerÂ
Manual one, can load 5Â tons raw material
5
Rollers for formingÂ
13+14Â rows
6
Diameter of the roller
80mm
7
Rolling material
Carbon Steel 45#
8
Main motor power
4kw
9
Productivity
8-12m/min
10
Cutting method
Hydraulic mould cuttingÂ
11
Material of the cutting blade
Cr12
12
Hydraulic cutting powerÂ
3kw
13
Processing precision
Within 2.00mm
14
Control system
Delta PLC control
15
Side panel of machine
14mm
16
Main structure of the machine
300 HÂ steel
17
WeightÂ
About 4.2 T
18
Dimensions
7.5*1.45*1.1m
19
Voltage
380V 50Hz 3phases
3.the picture of the IBR and corrugaed double layer roll forming machineÂ
4.Packaging &Â Shipping
Main machine is nude, the computer control box is packed with wooden fram
Â
5.FAQ
Â
1:How to play order: Inquiry---confirm the profile drawings and price----confirm the PI---arrange the deposit or L/C---then OK
2:How to visit our company:
Fly to Beijing airport:   By high speed train From Beijing Nan to Cangzhou Xi (1 hour),then we can pick up you.
Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao  to Cangzhou Xi(4.5 hours),then we can pick up you.
If any questions,you can call me mobile phone at any times:0086-15075710422
3:When we exported the machines:
We have beening making and exporting the machines since from the year of 1998.
4:If you want to get more pictures or videos of the machines,I can send them to you by Email or SKype.
Â
6.contact information:
CONTACT PERSON:helen wang
MOBILE NUMBER:0086-15075710422
Â
