Flotation column sorting technology for molybdenum oxide ore
Fully Hydraulic Jumbo Drilling Rig Underground tunneling mining drilling rig machine
1.Rugged and reliable
Tunnel Drilling Machine,Channel Tunnel Drill,Tunnel Boring Drill,Channel Tunnel Drilling Machine JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrillingwx.com
Mine existing 1100t / d processing amount beneficiation plants, divided into two series. A series of 500t / d processing capacity, using 1 rough selection, 3 sweeps, 10 selected processes; two series scale 600t / d, using 1 rough selection, 4 sweeps, 10 fine Selected process.
The main problem is the presence of the above-mentioned process: â‘ molybdenum metal recovery rate is low, only 40.00% - 50.00%; â‘¡ low grade molybdenum concentrate, molybdenum concentrate grade of only 15.00% ~ 20.00%, the lowest reach of molybdenum concentrate National quality standards.
In March 2006, the mine cooperated with China University of Mining and Technology to conduct a semi-industrial split test of -20μm fine-grain flotation column by column sorting process, followed by a grain-level semi-industrial split test and a selective split test. Satisfactory test results were obtained; in August 2007, the plant installed 3 industrial flotation columns, and the system was stable after commissioning tests.
The fine mud part is divided into a part of the floating ore mine for hydrocyclone classification, and the -20μm fraction is entered into the column sorting system. After 1 rough selection and 2 times selection, the concentrate product and tailings are obtained; the whole grain fraction The selection is directly from the inlet of the ore flotation into the column sorting system for sorting; the selected part is directly introduced into the flotation machine rough selection concentrate to obtain the final molybdenum concentrate product through three times.
The fine mud and full grain sorting process is shown in Figure 1, and the selected process is shown in Figure 2. 
The results of semi-industrial split test of fine mud are shown in Table 1. The results of full-scale semi-industrial split test are shown in Table 2, and the results of selected split test are shown in Table 3.
Table 1 Semi-industrial split test results of fine-grained ore %
It can be seen from Table 1 that for the sorting of fine-grained molybdenum ore, the column sorting has obvious advantages over the flotation machine process, the concentrate grade is increased by 8.82 percentage points, and the recovery rate is increased by 12.13 percentage points. Since most of the high oxidation portion of the ore is present in the fine fraction, it is effective to classify the fine fraction by column sorting.
Table 2 Results of full-grain grade ore stability test %
It can be seen from Table 2 that, in the classification of full-grained molybdenum ore, compared with the fine-grained grade, the column-type sorting concentrate has little change, but the tailings are slightly higher. The main reason is that the ore particle size becomes coarser and the part that is not completely dissociated increases; however, the sorting result of the flotation machine process is better than that under the same conditions. In the case of equivalent feedability, the concentrate grade of the column sorting is improved. 11.78 percentage points, the recovery rate increased by 7.14 percentage points.
It can be seen from Table 3 that, compared with the results of the 10 selections of the flotation machine, under the same feeding conditions, the two-stage selection of the column sorting is better. The concentrate grade can be increased to 38.52%, which is 20.02% higher than the flotation machine, and the selected recovery rate is increased by 21.09%.
The semi-industrial split test results of the oxidized ore molybdenum ore show that the column sorting has a more efficient sorting efficiency for the high oxidation rate molybdenum ore than the ordinary flotation machine process. Due to the high degree of oxidation of ore, it is difficult to increase the concentrate grade to more than 40.00% under the existing pharmaceutical system conditions, and the recovery rate is difficult to increase to more than 65.00%.
3. Safe,roof ROPS and FOPS approved
4. Heavy duty and verrsatile boom means direct,fast and accurate positioning
5.Feed rotation unit with 360 degrees rollover and 360 degrees rotation,could drill side doors and bolting holes
6.High performance with reliable hydraulic control system,ergonomically designed operator environment,good visibility and hand reach servicability on the panel
7.Heavy feed and rotation rock drill designed for any face condition
8. Operation friendly for easy drilling and tramming
9.Main application:
9.1.Hard rock blasting holes drilling
9.2.Tunnelling
9.3. Mining
9.4.Hydropower projects
9.5.Compact hydraulic station
9.6.The radiator for drilling machine can reduce the oil temperature efficiently to avoid hydraulic 9.7oil from changing to low viscosity or destroyed because of the very high temperature of oil.
9.8.The electric control box can protect the electric motor to operate safely.