Integrated vibration transmitter VIB-100
In addition to its industrial uses, phosphorus pentasulfide has also been used in the laboratory for the synthesis of various organic compounds, including thioesters, thioamides, and thioethers. It is typically used as a reagent in these reactions, as it can convert carboxylic acids and other functional groups into their corresponding thio derivatives.
Phosphorus pentasulfide (P2S5) is a chemical compound composed of two phosphorus atoms and five sulfur atoms. It is a yellowish-green solid that is insoluble in water but soluble in most organic solvents.
Phosphorus pentasulfide is commonly used in organic synthesis as a reagent for the conversion of alcohols to thiols and thioesters. It is also used in the production of insecticides, fungicides, and herbicides.
Phosphorus pentasulfide is a highly reactive and flammable compound that can pose a significant health hazard if not handled properly. It can cause severe irritation to the eyes, skin, and respiratory system, and is considered a potential carcinogen. Proper protective equipment, such as gloves and goggles, should be worn when handling this compound.
Phosphorus pentasulfide (P2S5) is a highly reactive and dangerous chemical compound that is commonly used in the production of pesticides, lubricants, and other industrial chemicals. It is a yellowish solid that can be easily ignited and releases toxic fumes when exposed to air or water.
Exposure to phosphorus pentasulfide can cause severe respiratory and skin irritation, as well as eye damage. Inhalation of the fumes can lead to coughing, wheezing, and shortness of breath, while skin contact can cause burns, blisters, and chemical burns.
Phosphorus pentasulfide is also highly flammable and can ignite spontaneously when exposed to air or moisture. It reacts violently with water, releasing toxic hydrogen sulfide gas, which can cause respiratory failure and even death.
Due to its highly reactive nature and potential health hazards, phosphorus pentasulfide should only be handled by trained professionals in a controlled environment with appropriate safety measures in place.
Chemical Phosphorus pentasulfide with CAS 1314-80-3,Phosphorus Pentasulfide Cas 1314-80-3,Phosphorus Pentasulfide Hazardous Chemical,Dangerous Chemical Phosphoric Sulfide Sichuan Jinhe Qihang Co,. Ltd. , https://www.jinhechemicals.com
Based on the HN500 integrated vibration sensor, a liquid crystal display with backlight is added to display the vibration velocity RMS or vibration displacement peak-to-peak value through the LCD screen, and with a standard 4-20 mA current output, direct connection. DCS, PLC or other equipment truly realizes the “Sensor Ten Monitoring Instrument†type vibration monitoring function. This product is convenient for on-site observation and has excellent performance. It is also very affordable compared to the vibration monitoring instrument. It is an ideal for absolute vibration measurement and monitoring of factory equipment. select.
Integrated vibration transmitter VIB-100
1 Frequency response: 5~ 1000 Hz
2 Self-vibration frequency: 4.5Hz or 10Hz
3 Measurement range: 0～20mm/s (speed effective value) or 0～200um (displacement peak-to-peak value)
4 signal output: 4 ~ 20mA (± 0.05mA)
5 Output impedance: ≤500Ω
6 Working voltage: DC24V±10%
7 Wiring method: two-wire system
8 Measurement direction: universal
9 Operating environment: Temperature -40 ° C ~ 100 ° C Relative humidity ≤ 90%
10 Dimensions: φ35×70mm
11 Installation thread: M10×1.5 ×10
12 weight: about 300g
Dimensions: Diameter: 40mm; High 80mm Eddy Current Axis Displacement Sensor Shaft Vibration Probe Front Device TM0180-A08-B00-C06-D10 Eddy Current Axis Displacement Sensor Shaft Vibration Probe Front Device TM0180-A08-B00-C05-D10 Eddy Current Axis displacement sensor shaft vibration probe front end TM0181-A40-B00 extension cable TM0181-A40-B01 extension cable TM0181-A45-B00 extension cable TM0181-A45-B01 extension cable TM0182-A50-B00- with Hart communication integrated vibration Feeder
CD-21-2-C/CD-21-2-S/CD-21-T/CD-21C/S/BCD-21A/CD721/WIND vibration speed sensor
MLS-9/MLV-6/MLV-7/MLV-8/MLV-9200/MLV-9268/MLV-27/MT1/MT2T/MT3T/MT3M/Vibration Sensor
CS-CD-001/CS-CD-010/OD9200/OD9300/S6000/PR9266/PR9268/20/30/60/70/ Bush vibration sensor
MLV-9200(16699/900)/ 9200/74712/47633/HT-2ZD-24/ZD25/ZDF bearing vibration speed sensor YZH-K series electronic vibration switch ZDT-2 portable vibration calibration table ZST-1 speed calibration Taiwan 8400 series static calibrator instrument ZY-350 dynamic calibrator instrument DWQZ series eddy current sensor SZ-4 type magnetoelectric speed sensor SZ-6 (C) type magnetoelectric speed sensor SZ-6B type magnetoelectric speed Sensor SZ-6i explosion-proof magnetic electric speed sensor ZHS-9/ZHV-9 integrated ultra-low frequency vibration displacement sensor SMCB-01/02 magnetic sensitive speed sensor integrated two-wire vibration transmitter SZCB series reluctance speed Sensor TD series LVDT sensor UT-81 series LVDT sensor B49 (UHZ) series magnetic flip column liquid level sensor SZCB-01i type explosion-proof magnetic resistance type speed sensor SZ-6i type explosion-proof magnetic type speed sensor TD-1i type LVDT sensor CWY- DO eddy current sensor probe front-end device CWY-DO810030 eddy current sensor extension cable TRLS-9 low-frequency vibration speed sensor TRLV-9200 vibration speed sensor TRLV-9268 vibration speed sensor TRLV-8 vibration speed sensor GA-GT-61 acceleration sensor TR2001 axis Shaft vibration to displacement transducer TR2011 Transmitter TR2081 Rotary Transmitter TR2031 Shell Vibration Transmitter TR2061 Bearing Vibration Transmitter TR3001 Axial Displacement Transmitter TR3011 Shaft Vibration Transmitter TR3081 Rotary Transmitter TR3031 Shell Vibration Transmitter TR3061 Bearing Vibration Transmitter WB -8501C digital display axial position detection system WB-8112B digital display dual channel vibration detector instrument WB-8521C digital display relative expansion detector instrument integrated two-wire vibration transmitter
RS6917/zzhke integrated vibration transmitter
Technical Parameters:
Frequency range: 10-1000HZ (at speed output); 10-500HZ (displacement output)
Range: 1. Speed ​​true RMS value 0-10mm / s; 0-20mm / s (user selectable)
2. Displacement peak-peak 0-100um; 0-200um (user selectable, expandable to 2000um)
Output mode: three-wire (two-wire system) 4-20mA output can be connected to PLC; DCS display vibration value
Power supply: +24VDC ± 10%
Mounting thread: M8
Ambient temperature: -10-+80
Relative humidity: 80%
Weight about: 0.5Kg