ISO Certification Magnetic Iron Separator for Processing Fe/Iron/Ore/Weak Magnetic Materials

Introduction
BTK series iron separator for magnetic mineis designed by our company basing advanced technology.it consist of Electromagnetic iron removal device,Metal detector,No magnetic idler roller,Rectifier control cabinet.It can match with the conveying belt to eliminate the magnetic impurities, such as the original ore, sintered ore, pellet ore, block ore and others. It can separate ferromagnetic materials with the least mine to protect the crushers.It has a series advantages,such as with drum shape compact structure,automatic belt-off-correction feature,easy to maintain,low power consumption,it can be work in harsh environment.

Technical Feature
1.The design of the magnetic field in this system is selected based on the Optimizes Computerizes Simulation.
2.With drum shape compact structure, automatic belt-off-correction feature.
3.Easy to maintain, low power consumption.
4.With the feature of full function, manual and centralized control, it can work in harsh environment.
5. Used with metal detector to make automatic detection system without leaking iron phenomenon. 
6. Multi-level separate repeatedly to separate ferromagnetic materials with the least mine.

Structure
1. Electromagnetic iron removal device: the main magnetic field is composed of the main magnetic pole, the main magnetic pole adopts electromagnetic type, the secondary magnetic pole adopts electromagnetic or permanent magnetic type. The iron discharge method is automatic unloading. The mounting mode is mounted and seated.
2. Metal detector: HTK magnetic iron ore removal and metal detectors are used in conjunction with metal detectors, and the ability to absorb iron from the main magnetic system to the secondary magnetic system should be reduced in turn.
3. No magnetic idler roller: no magnetic roller should be selected under the main magnetic pole.
4. Rectifier control cabinet: the special belt type electromagnetic except iron, metal detector and rectifying control cabinet form the magnetic.
Work Principle
BTK magnetic iron removal system transports materials on the conveyor, the metal detector installed in the front, BTK special magnetic iron separator is behind metal detector.The non-magnetic splitter platform is connected with the iron parts that are sucked out after the iron bar.The rectifier control cabinet is connected with the metal detector and the special belt electromagnetic iron remover. When the metal detector detects the iron materials,the alarm is set off. The signal is sent to the rectifier control cabinet. The control cabinet starts the belt type except iron and excitation. In the main magnetic pole, the iron parts and some of the more magnetic materials are also sucked up. Through the rotation of the discharging iron straps backward movement, due to the magnetic ore and iron on the shape and magnetic have very big difference, so the magnetic separation after sorting through three times in the area, most of the magnetic ore fall onto the conveyor belt, a small amount of material with iron to non-magnetic materials were separated to platform.After four times it reached a good effect.
Application
It can match with the conveying belt to eliminate the magnetic impurities, such as the original ore, sintered ore, pellet ore, block ore and others. It can separate ferromagnetic materials with the least mine to protect the crushers.

Technical data

NO.	Model	Cooling method	width of conveyor belt(mm)	mean power (≤kw)	Main existing power     (≤kw)	Ancillary existing power (≤kw)	Width of Unloading iron Belt(mm)	driving power(kw)	Model of metal detector
1	BTK-6	self-cooling	600	2.0	5.0	4.8	500	3.0	GJT-650
2	BTK-8		800	3.0	9.0	7.5	650	4.0	GJT-800
3	BTK-10		1000	4.6	13.0	10.8	800	5.5	GJT-1000
4	BTK-12		1200	5.0	18.0	15.0	1000	5.5	GJT-1200
5	BTK-14		1400	6.5	25.0	18.0	1200	7.5	GJT-1400
6	BTK-16		1600	8.0	32.0	27.0	1400	11.0	GJT-1600
7	BTK-18		1800	9.5	45.0	36.0	1600	15.0	GJT-1800
8	BTK-20		2000	10.6	50.0	42.0	1800	15.0	GJT-2000

Packaging & Delivery
Shipped in 30 days after payment.
Company & Customer Visiting
www.baitemining.com
There is no better , only better.
Weifang baite Magnet Technology Co., Ltd . is a modern joint-stock enterprise, which is producing magnetic and power equipment .The service is related to more than 10 areas ,such as electricity , coal ,building materials, metallurgy ,ports ,mining ,nonferrous metals ,power environmental production .At present ,we  have provided more than 3000 domestic customers with reliable and value-added and convenient professional equipment and programes, and at the same time ,we occupy more than 60%magnetic separation equipmemt matching share of China ball mill, crusher, iron sand ship and other production industry, Baite has firmly implemented IS09001:2000 international quality magnagement system standard and IS010012 international quality inspection system standard.

Factory Advantages & Service
Baitemagnet factory for general users and special users design and production of various types of customized products.The company owns 3, 000 square meters of mine machinery production plant in linqu area of weifang, and each product has a separate workshop to assemble specialized production workers.Most of our products are self-developed products, combining with advanced technology at home and abroad to ensure that the industry is competitive and fully meets the technical requirements of customers.Our production capacity is strong, and we have a special production line for customers who are in urgent need of the goods.
We are full of enthusiasm, high quality service, think the customer value is the principle. Provide the spare parts and vulnerable parts of the products at the factory price.
Once the equipment failure in the process of production, the company within 24 hours to the customer's phone must come up with a clear solution, and to resume production first and then the responsibility attitude quickly solve the problem.


FAQ
1.Q: Can you provide samples?
A: Yes. We can make customized samples to you for quality checking and design confirmation.
2.Q: How long is the warrenty of your equipments? Does your company supply the spare parts?
A: The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.
3.Q: How to make the payment? 
A:we accept the payment by T/T or Western Union or Cash, L/C .For T/T, the customer can choose 100% in advance or 30% in advance, and pay the 70% balance before shipment. 
4.Q: What is the shipping port?
A: Usually we ship from Qingdao port. If you want to ship from another port we can coordinate with you.
5.Q: What is the lead time?
A: 30-45 days after payment and production drawing confirmation.
6.Q: What is your MOQ?
A: Normally 1 piece is acceptable. Please consult with our sales for details.











 

Introduction
BTK series iron separator for magnetic mineis designed by our company basing advanced technology.it consist of Electromagnetic iron removal device,Metal detector,No magnetic idler roller,Rectifier control cabinet.It can match with the conveying belt to eliminate the magnetic impurities, such as the original ore, sintered ore, pellet ore, block ore and others. It can separate ferromagnetic materials with the least mine to protect the crushers.It has a series advantages,such as with drum shape compact structure,automatic belt-off-correction feature,easy to maintain,low power consumption,it can be work in harsh environment.

Technical Feature
1.The design of the magnetic field in this system is selected based on the Optimizes Computerizes Simulation.
2.With drum shape compact structure, automatic belt-off-correction feature.
3.Easy to maintain, low power consumption.
4.With the feature of full function, manual and centralized control, it can work in harsh environment.
5. Used with metal detector to make automatic detection system without leaking iron phenomenon. 
6. Multi-level separate repeatedly to separate ferromagnetic materials with the least mine.

Structure
1. Electromagnetic iron removal device: the main magnetic field is composed of the main magnetic pole, the main magnetic pole adopts electromagnetic type, the secondary magnetic pole adopts electromagnetic or permanent magnetic type. The iron discharge method is automatic unloading. The mounting mode is mounted and seated.
2. Metal detector: HTK magnetic iron ore removal and metal detectors are used in conjunction with metal detectors, and the ability to absorb iron from the main magnetic system to the secondary magnetic system should be reduced in turn.
3. No magnetic idler roller: no magnetic roller should be selected under the main magnetic pole.
4. Rectifier control cabinet: the special belt type electromagnetic except iron, metal detector and rectifying control cabinet form the magnetic.
Work Principle
BTK magnetic iron removal system transports materials on the conveyor, the metal detector installed in the front, BTK special magnetic iron separator is behind metal detector.The non-magnetic splitter platform is connected with the iron parts that are sucked out after the iron bar.The rectifier control cabinet is connected with the metal detector and the special belt electromagnetic iron remover. When the metal detector detects the iron materials,the alarm is set off. The signal is sent to the rectifier control cabinet. The control cabinet starts the belt type except iron and excitation. In the main magnetic pole, the iron parts and some of the more magnetic materials are also sucked up. Through the rotation of the discharging iron straps backward movement, due to the magnetic ore and iron on the shape and magnetic have very big difference, so the magnetic separation after sorting through three times in the area, most of the magnetic ore fall onto the conveyor belt, a small amount of material with iron to non-magnetic materials were separated to platform.After four times it reached a good effect.
Application
It can match with the conveying belt to eliminate the magnetic impurities, such as the original ore, sintered ore, pellet ore, block ore and others. It can separate ferromagnetic materials with the least mine to protect the crushers.

Technical data

NO.	Model	Cooling method	width of conveyor belt(mm)	mean power (≤kw)	Main existing power     (≤kw)	Ancillary existing power (≤kw)	Width of Unloading iron Belt(mm)	driving power(kw)	Model of metal detector
1	BTK-6	self-cooling	600	2.0	5.0	4.8	500	3.0	GJT-650
2	BTK-8		800	3.0	9.0	7.5	650	4.0	GJT-800
3	BTK-10		1000	4.6	13.0	10.8	800	5.5	GJT-1000
4	BTK-12		1200	5.0	18.0	15.0	1000	5.5	GJT-1200
5	BTK-14		1400	6.5	25.0	18.0	1200	7.5	GJT-1400
6	BTK-16		1600	8.0	32.0	27.0	1400	11.0	GJT-1600
7	BTK-18		1800	9.5	45.0	36.0	1600	15.0	GJT-1800
8	BTK-20		2000	10.6	50.0	42.0	1800	15.0	GJT-2000

Packaging & Delivery
Shipped in 30 days after payment.
Company & Customer Visiting
www.baitemining.com
There is no better , only better.
Weifang baite Magnet Technology Co., Ltd . is a modern joint-stock enterprise, which is producing magnetic and power equipment .The service is related to more than 10 areas ,such as electricity , coal ,building materials, metallurgy ,ports ,mining ,nonferrous metals ,power environmental production .At present ,we  have provided more than 3000 domestic customers with reliable and value-added and convenient professional equipment and programes, and at the same time ,we occupy more than 60%magnetic separation equipmemt matching share of China ball mill, crusher, iron sand ship and other production industry, Baite has firmly implemented IS09001:2000 international quality magnagement system standard and IS010012 international quality inspection system standard.

Factory Advantages & Service
Baitemagnet factory for general users and special users design and production of various types of customized products.The company owns 3, 000 square meters of mine machinery production plant in linqu area of weifang, and each product has a separate workshop to assemble specialized production workers.Most of our products are self-developed products, combining with advanced technology at home and abroad to ensure that the industry is competitive and fully meets the technical requirements of customers.Our production capacity is strong, and we have a special production line for customers who are in urgent need of the goods.
We are full of enthusiasm, high quality service, think the customer value is the principle. Provide the spare parts and vulnerable parts of the products at the factory price.
Once the equipment failure in the process of production, the company within 24 hours to the customer's phone must come up with a clear solution, and to resume production first and then the responsibility attitude quickly solve the problem.


FAQ
1.Q: Can you provide samples?
A: Yes. We can make customized samples to you for quality checking and design confirmation.
2.Q: How long is the warrenty of your equipments? Does your company supply the spare parts?
A: The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.
3.Q: How to make the payment? 
A:we accept the payment by T/T or Western Union or Cash, L/C .For T/T, the customer can choose 100% in advance or 30% in advance, and pay the 70% balance before shipment. 
4.Q: What is the shipping port?
A: Usually we ship from Qingdao port. If you want to ship from another port we can coordinate with you.
5.Q: What is the lead time?
A: 30-45 days after payment and production drawing confirmation.
6.Q: What is your MOQ?
A: Normally 1 piece is acceptable. Please consult with our sales for details.











 

Coffee & Tea ware

Coffee Series :

We offer many different kinds of coffeeware, such as Double Wall French Press, Glass French Press , Pour Over Coffee Kettle ,handle drip coffee kettle, coffee filter, Coffee Canister , Coffee Tamper and so on.

Use our excellent quality product, enjoy a cup of coffee by yourselves.

If which one suitable for you, welcome to contact me or ask for the catalog .Will be glad to hear from you.

FAQ:

1:How can I get the sample?

We can provide the sample for customers to check the quality.

Please kindly provide the delivery info for calculate the sample cost. If you have DHL /TNT/UPS/FEDEX account, please also kindly provide it to us.

You can do the payment of sample via T/T and PayPal.

2:How about the sample time?

Usually the sample time is 7~10 days after have the sample cost.

3:How long will it take for mass production?

Usually 45~60 days after have the deposit.

4:Can we Have our logo or company name to be printed on your products or the package?

Welcome OEM.

5:what certificate can you provide?

CE,CB,GS,FDA,LFGB,ROHS are available here.

6:How can we get your monthly new products announcement?

Please join our mailing lists.

Pour Over Coffee Kettle,Coffee Series,Coffee Canister,Coffee Tamper

Jiangmen Wellway Houseware Co.,Ltd , https://www.wellway-hk.com