KCB stainless steel gear pump works

November 09, 2023

KCB stainless steel gear pump piston like a cylinder, when a tooth into the fluid space of another tooth, the liquid was squeezed out mechanically. Because the fluid is incompressible, the liquid and the tooth can not occupy the same space at the same time, so the fluid is eliminated. As a result of the continuous meshing of the teeth, this phenomenon occurs continuously and thus provides a continuous discharge at the outlet of the pump, the same amount of discharge per revolution of the pump. As the drive shaft rotates uninterruptedly, the pump discharges the fluid without interruption. Pump flow directly with the pump speed.
There is actually a limit to the speed of a gear pump, which depends mainly on the process fluid. If the oil is delivered, the pump can rotate at a high speed, but when the fluid is a high viscosity polymer When the melt, this limit will be greatly reduced.
It is very important to push the highly viscous fluid into the two-tooth space on the side of the suction port. If this space is not full, the pump can not discharge the exact flow rate, so the PV value (pressure × flow rate) is another limiting factor, and Is a process variable Due to these limitations, gear pump manufacturers will offer a range of products, namely different sizes and displacements (quantities discharged per revolution). These pumps will be matched to the specific application process to optimize system capacity and price. If there are special requirements can provide drawings.

Shredder And Crusher Two In One

Shredder And Crusher Two In One is suitable to treat wooden products, the big, thick of plastic products, such as big diameter plastic pipe, the shell of TV sets, refrigerators and washing machines, tires, plastic packing case, computer hard disk, aluminum, bronze and the thickness of steel less than 5mm.

Feature:

1.main shaft is driven by a gear box, smooth operation, low noise, large torque.

2.Each rotary blade has 4 cutting edges, the wear and tear can be rotated 90 ° to continue to use.

3.knife with small "V" shaped installation, so turn the knife in the whole work cut material evenly, reduce energy consumption, reduce noise.

4. Rotor blades on the knife holder and removable for easy cleaning, maintenance.

Shredder And Crusher Two In One,plastic shredder and crusher,waste plastic shredder and crusher system,Shredder Crusher

zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstars-machineries.com