Marine Twin Screw Air Compressor
The advantages of 2021 tractor water well drill rig:
The repeated use of the tube and protecting in drilling to the corresponding position Into the hole, we also need to pull it up, in order to make its use more convenient, portable tube drawing device was designed, can use the quick connector directly connected to drill, drill to to pull power clamp, this design method, not only reduce the cost of pig pull, increases the flexibility and convenience.
Drill in tractor diesel engine,tractor type water well drilling rig,tractor integrated water well drilling rig Henan YK Prospecting Machinery Co., Ltd , https://www.yyphotovoltaicpilingrig.com
1. Brief introduction of Marine Twin Screw Air Compressor
   The screw air compressor is an air compressor which is a volumetric gas compression machine with working volume for rotary motion. The compression of gas depends on the change of volume, and the change of volume is achieved by turning a pair of rotors of the compressor in the casing.
The screw compressor is composed of a pair of parallel, intermeshing negative and positive screws, which is the most widely used in rotary compressor.
2. Structural characteristics of Marine Twin Screw Air Compressor
    The basic structure of the screw air compressor: in the compressor body, a pair of intermeshing spiral rotors are arranged in parallel, usually the rotor with a convex tooth outside the circle, called the Yang rotor or the sun screw. The rotor with a concave tooth in the circle is called a negative rotor or a negative screw. The General Yang rotor is connected with the original motive, and the last pair of bearings on the rotor rotated by the Yang rotor is axially positioned and the axial force in the compressor is subjected to the axial force. The cylindrical roller bearings at both ends of the rotor enable the rotor to be positioned in a radial direction and bear the radial force in the compressor. At the two ends of the compressor body, a certain shape and size hole is opened. One is for inhalation, the other is air inlet, and the other is called exhaust port.
SUCTION
   The working process of the screw air compressor is analyzed in detail. When the rotor is rotated, the space of the tooth groove of the Yin and Yang rotor is the largest when it turns to the opening of the intake end wall. At this time, the space of the rotor tooth groove is connected with the air inlet, because the gas of the tooth groove in the exhaust is completely discharged, and the tooth groove is in a vacuum state when the exhaust gas is completed. When transferred to the intake port, the external gas is sucked into the groove of the Yin Yang rotor. When the gas is full of tooth grooves, the inlet end of the rotor is turned away from the air inlet of the casing, and the gas in the groove is closed.
COMPRESS
    The compression process of the working process of the screw air compressor is analyzed in detail: when the Yin and Yang rotor is at the end of the suction, the tooth tip of the Yin and Yang rotor will be closed with the casing, and the gas is no longer outflow in the tooth groove. The meshing surface gradually moves to the exhaust end. The gap between the meshing surface and the exhaust port is gradually smaller, and the gas in the groove is increased by compression pressure.
DISCHARGE
   The exhausting process of the working process of the screw air compressor is analyzed in detail: when the meshing end of the rotor is transferred to the exhaust port of the machine shell, the compressed gas begins to expel until the meshing surface of the tooth tip and the tooth groove is moved to the exhaust end. At this time, the space between the meshing surface of the Yin and Yang rotor and the exhaust port of the engine shell is 0, that is to complete the exhaust process. At the same time, the length of the groove between the meshing surface of the rotor and the air inlet of the casing reaches the longest, and the intake process is carried out again.
  2. the operation and maintenance are convenient and the automation level is high. Operators need not undergo long time professional training to achieve unattended operation.
  3., the power balance is good, and there is no unbalanced inertia force. The machine can work at high speed and smoothly without foundation.
  4. strong adaptability, with the characteristics of forced gas transmission, volume flow is almost free from the influence of exhaust pressure, and can maintain high efficiency in a wide range of working conditions. In the case of no change in the compressor structure, it is suitable for a variety of working conditions, so it is easy to fix the batch production.
 5. multi phase mixing, the rotor tooth surface between the actual clearance, so the liquid impact, can be compressed to liquid gas, containing dust gas, easy to polymerize gas and so on.
  6. spool valve flow regulation, no need to reverse flow, can effectively reduce energy consumption.
The screw compressor is composed of a pair of parallel, intermeshing negative and positive screws, which is the most widely used in rotary compressor. There are two kinds of single screw and twin-screw, usually referred to as twin screw compressor.
MODEL
Capacity
Pressure
power
cooling
external dimension
weight
remark
 (m3/min)
 (MPa)
(kW)
(mm)
(kg)
LGFD-1.4/7-C
1.4
0.7
11
air cooling
1130×890×1170
720
CSPA11
LGFD-1.7/8-C
1.7
0.8
15
air cooling
1130×890×1170
740
CSPA15
LGFD-1.4/10-C
1.4
1
15
air cooling
1130×890×1170
740
CSPA15
LGFD-2.5/8-C
2.5
0.8
18.5
air cooling
1130×890×1170
750
CSPA18
LGFD-2.2/10-C
2.2
1
18.5
air cooling
1130×890×1170
760
CSPA18
LGFD-3/8-C
3
0.8
22
air cooling
1130×890×1170
760
CSPA22
LGFD-2.8/10-C
2.5
1
22
air cooling
1130×890×1170
760
CSPA22
LGFD-2.4/12-C
2.4
1.2
22
air cooling
1130×890×1170
760
CSPA22
LGFD-3.8/8-C
3.8
0.8
30
air cooling
1180×1100×1470
950
CSPA30
LGFD-4.5/8-C
4.5
0.8
30
air cooling
1180×1100×1470
950
CSPA30
LGFD-3.8/10-C
3.8
1
30
air cooling
1180×1100×1470
950
CSPA30
LGFD-6/8-C
6
0.8
37
air cooling
1180×1100×1470
1000
CSPA37
LGFD-4.5/10-C
4.5
1
37
air cooling
1180×1100×1470
1000
CSPA37
LGFD-6.5/8-C
6.5
0.8
45
air cooling
1180×1100×1470
1050
CSPA45
LGFD-5.5/10-C
5.5
1
45
air cooling
1180×1100×1470
1050
CSPA45
LGFD-4.9/12-C
4.9
1.2
45
air cooling
1180×1100×1470
1050
CSPA45
SDW75-C
12
0.8
75
water cooling
2094×1440×1570
2000
CSDW75
CSDW90
12
1
90
water cooling
2094×1440×1570
2100
Â
CSDW90
14
0.8
90
water cooling
2094×1440×1570
2100
Â
CSDW110
16.5
0.8
110
water cooling
2600×1550×1600
2600
Â
SDW132-C
16.5
1
132
water cooling
2600×1550×1600
2800
CSDW132
CSDW132
20
0.8
132
water cooling
2600×1550×1600
2600
Â
CSDW160
20
1
160
water cooling
2600×1550×1600
2800
Â
CSDW200
30
0.8
200
water cooling
3500×2000×2000
4500
Â
CSDW250
30
1
250
water cooling
3500×2000×2000
5000
Â
CSDW250
36
0.8
250
water cooling
3500×2000×2000
4700
Â
CSDW315
36
Tractor Type Water Well Drilling Rig
Drill in tractor diesel engine as power of drilling, drilling rig working parts and tractor integrated into an organic whole, tractor is drill, and transport machinery, is also the motivation of drilling rig, can mount air compressor and other transportation means, save the transport vehicle investment, lower cost, work more convenient;
The drill rig designed the Mud Pump, which really realized the water and gas. It is very difficult to drill for a gas drill. It is an ideal choice for you. The design of the mud pump is optional. We will provide it only when you need it.