Model NO.: ACE65/132-80/156
Gearbox: High Torque Vertical Type
Bearing: NSK
Motor Brand: Siemens/Weg
Extrusoin Speed: up to 7m/Min
Dosing Screw Type: Double Screw
Degassing System: Double Station
Screw and Barrle Material: Bimetallic
Electric Component: Siemens/Schneider/Omron/Ls
PLC Controller: Siemens
Trademark: ACEEXTECH
Transport Package: Wood Pallet and Film Covered/Wood Case
Specification: 400mm PVC/PE/PP WPC Wood plastic composite machine
Origin: China
HS Code: 8477800000
Model NO.: ACE65/132-80/156
Gearbox: High Torque Vertical Type
Bearing: NSK
Motor Brand: Siemens/Weg
Extrusoin Speed: up to 7m/Min
Dosing Screw Type: Double Screw
Degassing System: Double Station
Screw and Barrle Material: Bimetallic
Electric Component: Siemens/Schneider/Omron/Ls
PLC Controller: Siemens
Trademark: ACEEXTECH
Transport Package: Wood Pallet and Film Covered/Wood Case
Specification: 400mm PVC/PE/PP WPC Wood plastic composite machine
Origin: China
HS Code: 8477800000
Plastic PVC PE PP WPC Wood Plastic Composite Window Profile/Decking Profile/Ceiling Profile/Concrete Profil/Imitation Marble Profile Extrusion Line, include auxiliary equipment such as sanding machine, embossing machine and brushing machinWPC/PVC/PE Profile Extrusion Linee etc for PVC wood-plastic foamed and PE PP wood-plastic cold push extrusion process.;
special designed screw has excellent shearing and plasticizing effect, to ensure the quality of the products; high speed cooling of extrusion and calibration mold makes the production lineal speed faster and more efficient.
The unit consists ofÂ
Conical (Parallel) double screw extruder-
Wood plastic compostie profile tooling-
Vacuum forming table-
Haul-off machine-
Cutting machine-
Stacker-embossing machine-sanding machine-brushing machineProducing Wood plastic compostie profile
 width: 400mm
Advantages:♦ Specified screw designed for profile gets better plasticizing effect and achieves stable extrusion procedure;
♦ Speedy cooling forming die supports the production line with faster linear speed and higher efficiency;
♦ Upper and lower caterpillar is driven by the separate motor, which ensures the stability and reliability of the haul offÂ
 unit hauling; With calibration table is fore-back, left-right, up-down adjustable, simplified operation;
♦ Saw cutting unit, speedy and stable cutting, with the smooth incision; as to wide width profile, designed tracking cutter
 ensures the speedy and stable cutting;
♦ Intelligent PLC controlling system with human-friendly interface make the operation easily and conveniently.



Work flow and detailed information:
Feeder |
• To feed material into extruder; |
Extruder |
• World famous brand electrical component such as Siemens,Schneider, ABB etc; • High torque gearbox with adopts NSK/SKF bearing; • Siemens/WEG original motor achieved global after service; • Bimetallic screw and barrel; • Intelligent PLC controlling system with human-friendly interface. |
Die head |
• 3Cr13/3Cr17 material •Complete set include extrusion die head, calibrator and cooling tank • Apply to PVC wood-plastic foamed and PE PP wood-plastic cold push direct extrusion process |
Vacuum calibration table |
• Include full set of vacuum and water pump • Width: 240mm • Length: 6000mm • Independent operation panel for easy operation |
Haul off |
• Upper and lower caterpillar is driven separately and speed control by frequency inverter • Fast change type pads for easy operation • Install plate is adopts aluminum material • Compacting driving by pneumatic |
Cutter |
• Tracking cutter or lifting saw cutter with adopts double station dust collection system •Synchronous drivingby air cylinder or servo motor control |
Stacker |
•Stainless steel304 as touching material •Discharge driving by air cylinder |
Embossing machine/Brushing machine/sanding machine/lamination machine/hot stamping machine |
• Surface treatment of final product |
Main elements brand:♦ Motor: Siemens, WEG, SEW
♦ Gear reducer: SEW, FALK
♦ Bearing: SKF, FAG, NSK
♦ Air cylinder: Festo, SMC, AirTac
♦ PLC interface and module: Siemens, Schneider, Beckhoff
♦ Frequency inverter: ABB, Schneider, Siemens
♦ Servo motor: Lenze, Delta
♦ Pressure sensor: Dynisco, Gefran
♦ Low voltage component: Siemens, Schneider, Omron, LS
♦ Temperature controller: Omron, RKC
♦ Solid state relay: Crydom, Celduc
Technical Parameter:
Max. profile width(mm) |
Extruder model |
Designed capacity(kg/h) |
Extruder motor power(kw) |
180 |
ACE 51/105 or 55/110 |
80-120/120-150 |
18.5/22 |
240 |
ACE65/132 |
175-250 |
37 |
300 |
ACE65/132 |
175-250 |
37 |
400 |
ACE 65/132 or 80/156 |
175-250/250-350 |
37/55 |
Why choose ACEEXTECH:• Specialized R & D team involved in plastic extrusion industries over 25years.
• Ability to provide the customized plastic extrusion solutions.
• Complete sales system covering the pre-sales, sales and after-sales service jobs.
• Professional sales team with local language speaking ability for English, Portuguese, Spanish, Turkish and Russian markets.
Our service:♦  Ability to provide the customized plastic extrusion solutions;
♦  Turn-key solution is pleased to be provided include plant layout and design, formula, production support etc;
♦  Complete sales system covering the pre-sales, sales and after service jobs;
♦  Professional sales team with local language speaking ability for English, Portuguese, Spanish, Turkish and Russian markets;
♦  Commissioning & installation service in customer plant and free training to client labors.
In order to provide you the specific proposal, please advise:♦  Basic drawing of final product request to be provided;
♦  Output capacity will be need;
♦  Single, double even three cavity extrusion?
Contact to ACEEXTECH:Â JIANGSU ACEEXTECH MACHINERY CO., LTDTel:+86-512 58620105
Fax:+86-512 58620107
  Â
Mobile/hatsApp: +86 13962472339
Website:www.aceextech.comÂ
Add:No.18 Yuefeng Road, Nanfeng Town, Zhangjiagang City Jiangsu, China, 215600
Plastic PVC PE PP WPC Wood Plastic Composite Window Profile/Decking Profile/Ceiling Profile/Concrete Profil/Imitation Marble Profile Extrusion Line, include auxiliary equipment such as sanding machine, embossing machine and brushing machinWPC/PVC/PE Profile Extrusion Linee etc for PVC wood-plastic foamed and PE PP wood-plastic cold push extrusion process.;
special designed screw has excellent shearing and plasticizing effect, to ensure the quality of the products; high speed cooling of extrusion and calibration mold makes the production lineal speed faster and more efficient.
The unit consists ofÂ
Conical (Parallel) double screw extruder-
Wood plastic compostie profile tooling-
Vacuum forming table-
Haul-off machine-
Cutting machine-
Stacker-embossing machine-sanding machine-brushing machineProducing Wood plastic compostie profile
 width: 400mm
Advantages:♦ Specified screw designed for profile gets better plasticizing effect and achieves stable extrusion procedure;
♦ Speedy cooling forming die supports the production line with faster linear speed and higher efficiency;
♦ Upper and lower caterpillar is driven by the separate motor, which ensures the stability and reliability of the haul offÂ
 unit hauling; With calibration table is fore-back, left-right, up-down adjustable, simplified operation;
♦ Saw cutting unit, speedy and stable cutting, with the smooth incision; as to wide width profile, designed tracking cutter
 ensures the speedy and stable cutting;
♦ Intelligent PLC controlling system with human-friendly interface make the operation easily and conveniently.



Work flow and detailed information:
Feeder |
• To feed material into extruder; |
Extruder |
• World famous brand electrical component such as Siemens,Schneider, ABB etc; • High torque gearbox with adopts NSK/SKF bearing; • Siemens/WEG original motor achieved global after service; • Bimetallic screw and barrel; • Intelligent PLC controlling system with human-friendly interface. |
Die head |
• 3Cr13/3Cr17 material •Complete set include extrusion die head, calibrator and cooling tank • Apply to PVC wood-plastic foamed and PE PP wood-plastic cold push direct extrusion process |
Vacuum calibration table |
• Include full set of vacuum and water pump • Width: 240mm • Length: 6000mm • Independent operation panel for easy operation |
Haul off |
• Upper and lower caterpillar is driven separately and speed control by frequency inverter • Fast change type pads for easy operation • Install plate is adopts aluminum material • Compacting driving by pneumatic |
Cutter |
• Tracking cutter or lifting saw cutter with adopts double station dust collection system •Synchronous drivingby air cylinder or servo motor control |
Stacker |
•Stainless steel304 as touching material •Discharge driving by air cylinder |
Embossing machine/Brushing machine/sanding machine/lamination machine/hot stamping machine |
• Surface treatment of final product |
Main elements brand:♦ Motor: Siemens, WEG, SEW
♦ Gear reducer: SEW, FALK
♦ Bearing: SKF, FAG, NSK
♦ Air cylinder: Festo, SMC, AirTac
♦ PLC interface and module: Siemens, Schneider, Beckhoff
♦ Frequency inverter: ABB, Schneider, Siemens
♦ Servo motor: Lenze, Delta
♦ Pressure sensor: Dynisco, Gefran
♦ Low voltage component: Siemens, Schneider, Omron, LS
♦ Temperature controller: Omron, RKC
♦ Solid state relay: Crydom, Celduc
Technical Parameter:
Max. profile width(mm) |
Extruder model |
Designed capacity(kg/h) |
Extruder motor power(kw) |
180 |
ACE 51/105 or 55/110 |
80-120/120-150 |
18.5/22 |
240 |
ACE65/132 |
175-250 |
37 |
300 |
ACE65/132 |
175-250 |
37 |
400 |
ACE 65/132 or 80/156 |
175-250/250-350 |
37/55 |
Why choose ACEEXTECH:• Specialized R & D team involved in plastic extrusion industries over 25years.
• Ability to provide the customized plastic extrusion solutions.
• Complete sales system covering the pre-sales, sales and after-sales service jobs.
• Professional sales team with local language speaking ability for English, Portuguese, Spanish, Turkish and Russian markets.
Our service:♦  Ability to provide the customized plastic extrusion solutions;
♦  Turn-key solution is pleased to be provided include plant layout and design, formula, production support etc;
♦  Complete sales system covering the pre-sales, sales and after service jobs;
♦  Professional sales team with local language speaking ability for English, Portuguese, Spanish, Turkish and Russian markets;
♦  Commissioning & installation service in customer plant and free training to client labors.
In order to provide you the specific proposal, please advise:♦  Basic drawing of final product request to be provided;
♦  Output capacity will be need;
♦  Single, double even three cavity extrusion?
Contact to ACEEXTECH:Â JIANGSU ACEEXTECH MACHINERY CO., LTDTel:+86-512 58620105
Fax:+86-512 58620107
  Â
Mobile/hatsApp: +86 13962472339
Website:www.aceextech.comÂ
Add:No.18 Yuefeng Road, Nanfeng Town, Zhangjiagang City Jiangsu, China, 215600
Electric Stacker:
We manufacture Compact Electric Stacker and full
electric stacker for market demands. Our Narrow Aisle Electric Stacker has side-driven design and
maintenance free battery. It is a great walk
behind forklift. Our straddle
electric stacker is our client`s favorite. This ride-on electric stacker has AC brushless motor which provides more
power and less maintenance required. Akodi also supplies best value counterbalance electric forklift.
Economical
electric stacker:
-
High-power, high-performance lift
motor: powerful cargo lifting, cost-effective
-
DC motor drive system: smaller size,
high efficiency
-
Side-driven design: smaller turning
radius, suitable for operation in confined space
-
Operation handle: ergonomics,
comfortable operation, increased work efficiency
-
Maintenance free battery and internal
charger: easy for maintenance, easy to charge
-
Optional: Adjustable baseleg
Measurement/
Model
|
CL-10
|
Capacity
(Q)
|
kg
|
1000
|
Load
Center (C )
|
mm
|
500
|
Max
lift height (h)
|
mm
|
2000/2500/3000
|
Overall
extended height
|
mm
|
2415/2915/3415
|
Overall
collapsed height
|
mm
|
1580/1830/2080
|
Overall
fork width (b2)
|
mm
|
540/680
|
Fork
size (L*W*T)
|
mm
|
1150
(1220)*160*55
|
Min
height (h1)
|
mm
|
90
|
Overall
width (b1)
|
mm
|
820
|
Overall
length (L)
|
mm
|
1950
(2020)
|
Turning
radius (Wr)
|
mm
|
1360
|
Max
travel speed, full load/no load
|
Km/h
|
3/4.5
|
Max
lift speed, full load/ no load
|
mm/s
|
80/100
|
Max
lowering speed, full load/no load
|
mm/s
|
90/120
|
Max
Gradient performance, full load/ no load
|
%
|
5/7
|
Rear
drive wheel
|
mm
|
PU
φ210*70
|
Front
wheel
|
mm
|
PA/PU
φ80*70
|
Balance
wheel
|
mm
|
PA/PU
φ180*50
|
Driving
motor
|
Kw
|
DC0.75
|
Lift
motor
|
Kw
|
DC1.5
|
Battery
capacity
|
V/A
|
12V*2/60Ah
|
Weight
|
Kg
|
440/490/535
|
Battery
weight
|
Kg
|
45
|
Full electric
stacker:
-
Curtis control system and brushless
AC drive motor: powerful, improved work efficiency, and reliability
-
Forklift mast wheel, sprocket, chain,
and bearings: increased work efficiency, eliminating costly repair
-
Operation handle: ergonomics, comfortable
operation, increased work efficiency, break override feature
-
High quality protective glass:
exceptional visibility, ensures operator`s safety
-
Electronic steering: experiences less
fatigue, more accurate control
-
Optional: mechanical steering, adjustable
baseleg, shock-absorbing platform
Measurement/
Model
|
CL-10
|
CL-12
|
CL-15
|
Capacity
(Q)
|
kg
|
1000
|
1200
|
1500
|
Max
height (h)
|
mm
|
1600/2600/3200/3600
|
1600/2600/3200/3600
|
1600/2600/3200/3600
|
Overall
fork width (b2)
|
mm
|
570/690
|
570/690
|
570/690
|
Fork
size
|
mm
|
1150
|
1150
|
1150
|
Min
height (h1)
|
mm
|
86
|
86
|
86
|
Overall
height (h4)
|
mm
|
2000/1800/2100/2350
|
2000/1800/2100/2350
|
2000/1800/2100/2350
|
Overall
width (b1)
|
mm
|
805
|
805
|
805
|
Overall
length (L)
|
mm
|
1865
|
1865
|
1865
|
Turning
radius (wr)
|
mm
|
1436
|
1436
|
1436
|
Load
center (C )
|
mm
|
600
|
600
|
600
|
Battery
capacity
|
V/A
|
210Ah/24V
|
210Ah/24V
|
210Ah/24V
|
Charger
|
|
24V/30A
|
24V/30A
|
24V/30A
|
Weight
|
Kg
|
817-927
|
827-937
|
827-937
|
Battery
weight
|
Kg
|
175
|
175
|
175
|
Electric Stacker
Compact Electric Stacker,Full Electric Stacker,Narrow Aisle Electric Stacker,Walk Behind Forklift
Akodi Intelligent Robot Technology Co., LTD , https://www.akodiforklift.com