Production process of sulfuric acid titanium dioxide---Selection and preparation of raw materials (sulfuric acid)

Titanium white powder sulfuric acid produced in the second main raw material is sulfuric acid, it is a very reactive, strong oxidizing acids, due to its high boiling point (338 deg.] C), so it is suitable to use it to dissolve the titanium iron ore . The chemical composition of ilmenite is ferrous titanate, which is a weak acid weak base salt. It reacts with a strong acid (sulfuric acid), which is basically irreversible, and the reaction can be carried out more completely.
There is usually no special requirement for the quality of sulfuric acid, as long as it meets the national standard for industrial sulfuric acid, and even some of the smelter's recovered sulfuric acid can be used. However, as used in the food, pharmaceutical-grade or heavy metal ions more stringent requirements titanium dioxide products, smelter sulfuric acid recovery is unfit for use, or both using sulfuric pyrite sulfur produced in advance but also where the analysis of lead, The content of harmful impurities such as arsenic , cadmium and chromium .
For the concentration of sulfuric acid, it is generally 88% to 98%, but preferably not less than 85%. Usually, it is better to use sulfuric acid with a concentration of 92% to 96%. Because the concentration is too high, a large amount of heat will be released during the dilution, and the H + ions and SO 4 2+ ions will increase, and the probability of infiltration into the surface of the ilmenite surface will also increase. It is difficult to control the reaction extremely vigorously, and the reactants are solid and have few voids, which is not conducive to dissolution and leaching. If the concentration of the acid is too low, not only the amount of heat supplied to the reaction is small, but also the reaction rate is slow, the reaction is incomplete, the reactant is not easily solidified, the leaching is difficult, and early hydrolysis is liable to occur.
As the purity of sulfuric acid for bleaching and surface treatment is high, it is generally recommended to use battery grade sulfuric acid with a low heavy metal content and a low iron content.

Welded Gabion Mesh

hot dipped galvanized welded rock cage

Welded gabions are wire mesh containers welded with high quality steel mesh.They can be filled on site with hard durable stone materials to form mass gravity retaining structures. Owing to their inflexibility, welded gabion can not adapt to differential settlement or be used in water courses ,In comparison with woven wire gabions, welded gabion offer a higher strength. In order to meet different project requirements, various wire diameters and unit sizes are available for welded gabion. It is composed of Welded Mesh panel and spring steel lacing wire.

As a highly-accomplished wire mesh exporter, Kingdelong was established jointly by China and South Korea in 1986, Our strategic location in Anping County,Hebei province is only 300KM away from Beijing and Tianjin, which offers us very competitive advantages both in trade and logistics. Through two decades of hard work, Kingdelong company had evolved into one of China`s largest wire mesh manufacturing companies,Covering an area of over 200,000㎡, certificated by ISO 9001 & ISO 14001,as well as more than 450 diversified production machines, which are either imported from foreign countries or developed in-house.Wire mesh products find applications in a wide range of industries, from Pharmacy to petroleum and chemical to textile.

Welded Gabion Mesh,Welded Wire Mesh,Mesh Welded Gabion Wire,Gabion Retaining Wall Wire

ANPING KINDELONG WIRE MESH CO.,LTD. , https://www.wire-mesh.org