Model NO.: 19X100mm
Raw Material: Carbon Steel Ml15al (Swrch15A)
Support Standard: ISO 13918 ; GB/T10433; Aws D1.1
Surface Treatment: Plain &Black
Diameter: M10 M13 M16 M19 M22 M25
Length: 40-300mm
Tensile Strength: >= 450n/Mm2
Yield Point: >= 350n/Mm2
Elongation Percentage: >= 15%
Trademark: China IKING
Specification: ISO 13918; GB/T10433; AWS D1.1
Origin: Tianjin
HS Code: 7318290000
Model NO.: 19X100mm
Raw Material: Carbon Steel Ml15al (Swrch15A)
Support Standard: ISO 13918 ; GB/T10433; Aws D1.1
Surface Treatment: Plain &Black
Diameter: M10 M13 M16 M19 M22 M25
Length: 40-300mm
Tensile Strength: >= 450n/Mm2
Yield Point: >= 350n/Mm2
Elongation Percentage: >= 15%
Trademark: China IKING
Specification: ISO 13918; GB/T10433; AWS D1.1
Origin: Tianjin
HS Code: 7318290000
Nelson  Welding Shear Stud ConnectorÂ
  Production Discription:    Â

Shear Stud Connector type SD (ISO 13918) Dimensions (in mm) Â
|
d1-0.4 |
10 |
13 |
16 |
19 |
22 |
25 |
d5±0.3 |
19 |
25 |
32 |
32 |
35 |
41 |
d3±0.3 |
13 |
17 |
21 |
23 |
29 |
31 |
h3±0.5 |
7 |
8 |
8 |
10 |
10 |
12 |
h4 |
2.5 |
3 |
4.5 |
6 |
6 |
7 |
L1±1.5 |
40-105 |
40-160 |
40-200 |
40-250 |
60-250 |
60-250 |
Burn off |
3 |
3 |
4 |
5 |
5 |
6 |
Ferrule |
UF10 |
UF13 |
UF16 |
UF19 |
UF22 |
UF25 |
1.Burn off value shown are for welding to bare steel
2.There are two kinds of ceramic ferrule, one is through deck type which has 8 teeth,
the other one is common type which has 18 teeth.Â
The price is same for these two types.
3.The UFB type ceramic ferrule are for through deck welding , with 8 teeth !
Â
Shear Stud Connector type SC (AWS D1.1) in inch. Â
|
 |
1/2-0.01 |
5/8-0.01 |
3/4-0.015 |
7/8-0.015 |
d5±1/64 |
1 |
1-1/4 |
1-1/4 |
1-3/8 |
h3 |
9/32 |
9/32 |
3/8 |
3.8 |
L1±1/16 |
2-5.9 |
2-7.874 |
2-9.84 |
3.15-9.84 |
Burn off |
0.125 |
0.187 |
0.187 |
0.187 |
Ferrule |
UF13 |
UF16 |
UF19 |
UF22 |

Â
Chemical Component Of Material (%) Â
|
Material |
C |
Si |
Mn |
P |
S |
Al         |
ML15AL |
0.13-0.18 |
≤0.10 |
0.30-0.60 |
≤0.035 |
≤0.035 |
≥0.020 |
SWRCH18A |
0.15-0.20 |
≤0.10 |
0.60-0.90 |
≤0.030 |
≤0.035 |
≥0.020 |
 Mechanical PropertiesÂ
|
Country |
Tensile strength BN/mm2
|
Yield point BS/mm2
|
Elongation percentage δ%
|
Contraction percentage Ψ%
|
BSÂ EN ISO13918:2008
|
≥450 |
≥350 |
≥15 |
|
USA ANSI/AWSÂ D1.1
|
≥415 |
≥345 |
δ4≥20
|
≥50 |
CHINA GB/T10433
|
≥400 |
≥320 |
δ5≥14
|
|
By advanced production technology and strictly inspection system, our shear stud
connectors meet the standard of EN ISO 13918 or AWS D1.1,Â
both dimensions and mechanical properties are according to the above standards:Â
Tensile strength min. 450Mpa, Yield strength min. 350Mpa, Elongation min 15%, etc.Â
Â
Certification:
We have got ISO.CE.SGS certificate for our ISOKING shear stud .
Factory Producing Line :
1.Totally our factory have 8 producing lines for the shear stud. Â
2.We can make prompt delivery for overseas orders.
3.We can do OEM service according to client's requirement, please send your logo onÂ
  printing after the order.
4.Other standards or special dimensions are available on request.
Package:
ISOKING  provide appropriate package for shear stud connector ,Â
cartons (lined with plastic bags) & plywood pallets are frequently used;Â
we can also provide barrels (lined with plastic bags) & plywood pallets if you have long time stock request.

Â
Oversea Application:
1.Shear stud connectors are widely used in construction,industrial and automotive circle for holding concreate slab and steel members to resist shear force and increase shearÂ
holding capacity.Thay also used for embedment parts.
2.By 2014,in the development of 26 years,ISOKING shear stud connectors have beenÂ
widely used by more than 50 countries.
Our Vision:
We have exported 500X20''GP shear stud connector to oversea market on 2014 years. Now we are looking for serious agency for our own brand ISOKING shear stud in differentÂ
countries. If you are interested in us, please feel free to contact with us!
Â
 We sincerely welcome you visit our ISOKING insulation factory at  any time .
Â
Â
Nelson  Welding Shear Stud ConnectorÂ
  Production Discription:    Â

Shear Stud Connector type SD (ISO 13918) Dimensions (in mm) Â
|
d1-0.4 |
10 |
13 |
16 |
19 |
22 |
25 |
d5±0.3 |
19 |
25 |
32 |
32 |
35 |
41 |
d3±0.3 |
13 |
17 |
21 |
23 |
29 |
31 |
h3±0.5 |
7 |
8 |
8 |
10 |
10 |
12 |
h4 |
2.5 |
3 |
4.5 |
6 |
6 |
7 |
L1±1.5 |
40-105 |
40-160 |
40-200 |
40-250 |
60-250 |
60-250 |
Burn off |
3 |
3 |
4 |
5 |
5 |
6 |
Ferrule |
UF10 |
UF13 |
UF16 |
UF19 |
UF22 |
UF25 |
1.Burn off value shown are for welding to bare steel
2.There are two kinds of ceramic ferrule, one is through deck type which has 8 teeth,
the other one is common type which has 18 teeth.Â
The price is same for these two types.
3.The UFB type ceramic ferrule are for through deck welding , with 8 teeth !
Â
Shear Stud Connector type SC (AWS D1.1) in inch. Â
|
 |
1/2-0.01 |
5/8-0.01 |
3/4-0.015 |
7/8-0.015 |
d5±1/64 |
1 |
1-1/4 |
1-1/4 |
1-3/8 |
h3 |
9/32 |
9/32 |
3/8 |
3.8 |
L1±1/16 |
2-5.9 |
2-7.874 |
2-9.84 |
3.15-9.84 |
Burn off |
0.125 |
0.187 |
0.187 |
0.187 |
Ferrule |
UF13 |
UF16 |
UF19 |
UF22 |

Â
Chemical Component Of Material (%) Â
|
Material |
C |
Si |
Mn |
P |
S |
Al         |
ML15AL |
0.13-0.18 |
≤0.10 |
0.30-0.60 |
≤0.035 |
≤0.035 |
≥0.020 |
SWRCH18A |
0.15-0.20 |
≤0.10 |
0.60-0.90 |
≤0.030 |
≤0.035 |
≥0.020 |
 Mechanical PropertiesÂ
|
Country |
Tensile strength BN/mm2
|
Yield point BS/mm2
|
Elongation percentage δ%
|
Contraction percentage Ψ%
|
BSÂ EN ISO13918:2008
|
≥450 |
≥350 |
≥15 |
|
USA ANSI/AWSÂ D1.1
|
≥415 |
≥345 |
δ4≥20
|
≥50 |
CHINA GB/T10433
|
≥400 |
≥320 |
δ5≥14
|
|
By advanced production technology and strictly inspection system, our shear stud
connectors meet the standard of EN ISO 13918 or AWS D1.1,Â
both dimensions and mechanical properties are according to the above standards:Â
Tensile strength min. 450Mpa, Yield strength min. 350Mpa, Elongation min 15%, etc.Â
Â
Certification:
We have got ISO.CE.SGS certificate for our ISOKING shear stud .
Factory Producing Line :
1.Totally our factory have 8 producing lines for the shear stud. Â
2.We can make prompt delivery for overseas orders.
3.We can do OEM service according to client's requirement, please send your logo onÂ
  printing after the order.
4.Other standards or special dimensions are available on request.
Package:
ISOKING  provide appropriate package for shear stud connector ,Â
cartons (lined with plastic bags) & plywood pallets are frequently used;Â
we can also provide barrels (lined with plastic bags) & plywood pallets if you have long time stock request.

Â
Oversea Application:
1.Shear stud connectors are widely used in construction,industrial and automotive circle for holding concreate slab and steel members to resist shear force and increase shearÂ
holding capacity.Thay also used for embedment parts.
2.By 2014,in the development of 26 years,ISOKING shear stud connectors have beenÂ
widely used by more than 50 countries.
Our Vision:
We have exported 500X20''GP shear stud connector to oversea market on 2014 years. Now we are looking for serious agency for our own brand ISOKING shear stud in differentÂ
countries. If you are interested in us, please feel free to contact with us!
Â
 We sincerely welcome you visit our ISOKING insulation factory at  any time .
Â
Â
CNC Parts
Cnc Parts,Cnc Turning Part,High Precision Cnc Parts,Cnc Machining Parts
Jiangyin Mitoo Precise Co.,Ltd. , https://www.mitoosteel.com