Sinowon 30kg Digital Macro Hardness Tester Vickers Lab Equipment

 

HV-30M/30P/30A selection of testing force and dwell time is controlled and monitored on the front panel, it is automatic during the process of loading,dwell and unloading.  
 

HV-30M/30P/30A adopts digital microscopes with adjustable LED illuminator, doesn't need the operator to read the detail length of indentation, it only needs the operator to aim the D1, D2 diagonal of indentation and press the length key twice, then the built-in processor can compute the Vickers value and display the final testing result on LCD display automatically.
 

HV-30M/30P/30A doesn't need the operator to read the diagonal ofindentation and check the Vickers testing table again, it improves the speed and accuracy of Vickers hardness testing obviously.

The advantages of the Vickers hardness test are that extremely accurate readings can be taken, and just one type of indenter is used for all types of metals and surface treatments. Although thoroughly adaptable and very precise for testing the softest and hardest of materials, under varying loads, the Vickers machine is a floor standing unit that is more expensive than the Brinell or Rockwell machines.
 

Software Interface

Digital XY Anvil

The Vickers hardness test method consists of indenting the test material with a diamond indenter, in the form of a right pyramid with a square base and an angle of 136 degrees between opposite faces subjected to a load of 1 to 100 kgf. The full load is normally applied for 10 to 15 seconds.

The two diagonals of the indentation left in the surface of the material after removal of the load are measured using a microscope and their average calculated. The area of the sloping surface of the indentation is calculated. The Vickers hardness is the quotient obtained by dividing the kgf load by the square mm area of indentation.

 

Wind Power

Our firm introduced whole set of good-sized numerical control hydraulic folding equipment(1280/16000) as well as equipped with a series of good-sized professional equipments of armor plate-flatted machine, lengthways cut machine, numerical control cut machine, auto-closed up machine, auto-arc-weld machine, hydraulic redressing straight machine, etc. The firm produces all sorts of conical, pyramidal, cylindrical steel poles with production range of dia 50mm-2250mm, thickness 1mm-25mm, once taking shape 16000mm long, and large-scale steel components. The firm also is equipped with a multicolor-spayed pipelining. At the meantime, for better service to the clients, our firm founded a branch com. The Yixing Jinlei Lighting Installation Com, which offers clients a succession of service from design to manufacture and fixing.

Our products put into market range in: transmission line steel poles, substation tubular poles, high mast poles, flag poles, traffic signal poles, large advertising boards, street lamp poles, telecommunication poles, wind power poles, courtyard lamps,. The products has been sold to Southeast Asia, Australia, Middle East and Europe etc. as well as domestic most provinces and area, has been proved by the English Moody Co., comply with ISO9001:2000 Quality Control Certifications System standards. We have got the certificate for 220KV Transmission line steel poles, 500KV Steel construction and tubular poles, 750KV and below voltage Steel Tubular Tower and Telecommunication Poles.

Wind Power Pole, Wind Power Steel Pole, Solar Lighting Pole, Power Lighting Pole

Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.jinleisteelpole.com