Model NO.: Fabrication
Trademark: Zhao xu
Specification: Non-standard
Origin: China
HS Code: 848310900
Model NO.: Fabrication
Trademark: Zhao xu
Specification: Non-standard
Origin: China
HS Code: 848310900
Â
Number |
Item |
Specification |
1 |
Material |
Carbon steel, Stainless steel, brass or as per customer's requirements. |
2 |
Diameter |
0.3-17mm, tolerance: +/-0.001mm |
3 |
Roundness |
0.001mm |
4 |
Roughness |
Ra0.04 |
5 |
Straightness |
0.001mm |
6 |
Hardness |
HRC/HV |
7 |
Precision |
Grade 6 |
8 |
Length |
Max. 1000mm |
9 |
Heat treatment |
Point hardening, quenching hardening |
10 |
Surface treatment |
Zinc plating, nigrescence, chrome plating, nickel plating etc. |
11 |
OEM Service |
Providing us the drawing with detail information. |
12 |
Package |
Plastic bag inside and outer standard carton, pallet. According to client's demand. |
Â
Number |
Item |
Specification |
1 |
Material |
Carbon steel, Stainless steel, brass or as per customer's requirements. |
2 |
Diameter |
0.3-17mm, tolerance: +/-0.001mm |
3 |
Roundness |
0.001mm |
4 |
Roughness |
Ra0.04 |
5 |
Straightness |
0.001mm |
6 |
Hardness |
HRC/HV |
7 |
Precision |
Grade 6 |
8 |
Length |
Max. 1000mm |
9 |
Heat treatment |
Point hardening, quenching hardening |
10 |
Surface treatment |
Zinc plating, nigrescence, chrome plating, nickel plating etc. |
11 |
OEM Service |
Providing us the drawing with detail information. |
12 |
Package |
Plastic bag inside and outer standard carton, pallet. According to client's demand. |
Spiral Pipe Screw Conveyor
Install adjustment:
1.The screw conveyor can not be installed until the dust stuck during transportation or unloading
is cleaned.
2.Material groove center line and screw shaft should have an appropriate coaxial degree.
3.The drive device and the screw shaft should have a right coaxial degree.
4.The static equilibrium test should be carried out after the screw is installed.
5`After the conveyor installed, check whether there is any debris in the machine and if the lubrication is enough.
6.During the no-load test, the bearing should be oil-tight, and the bearing temperature should not be higher than 20℃. During the load test,the temperature of bearing should not exceed 30℃.
Attentions
(1) Lubricate the bearings, gears, chains and other transmission parts regularly.
(2)When the box-to-send machine stopped, check the abrasion of the spiral blade and repair and weld it when it wears seriously.
(3)The conveying amount can not be overloaded, otherwise the material will not be discharged, which may cause the screw shaft bending and box expansion.
(4) In the operation of the conveyor, if the noise is harsh, you should open the lid to check it and troubleshoot.
Flexible Screw Conveyor,Small Screw Conveyor,Cement Screw Conveyor
Zhengzhou XinFeng machinery manufacturing Co. Ltd , https://www.xfmachinery.com