The coal mine is a limited space and is a limited space with high gas, high dust, high temperature, high humidity and high danger. Therefore, the explosion-proof camera design for coal mines is complicated, and the requirements for the explosion-proof camera itself are severe.
Normative Citation Standards: All standards will be revised, and parties using this standard should explore the possibility of using the most standard versions of the following standards.
GB/T191-2008 packaging storage and transportation icon mark
GB/T 2423.1-2008 Environmental testing of electric and electronic products - Part 2: Test methods Test A: Low temperature
GB/T 2423.2-2008 Environmental testing of electrical and electronic products - Part 2: Test methods Test B: High temperature
GB/T2423.4-2008 Environmental testing of electric and electronic products - Part 2: Test method Test Db: alternating heat (12h + 12h cycle)
GB 2423.5-1995 Environmental testing of electrical and electronic products - Part 2: Test methods Test Ea and guide: Impact
GB 2423.8-1995 Environmental testing of electric and electronic products - Part 2: Test method test Ed: Free fall
GB/T 2423.10-2008 Environmental testing for electric and electronic products - Part 2: Test methods Test Fc and guide: Vibration (sinusoidal)
Q/LFJD-02-2018 Langfang Jiede Electronic Technology Explosion-proof Camera Product Standard
GB3836.1-2010 Explosive atmosphere - Part 1: General requirements for equipment
GB3836.4-2010 Explosive atmospheres - Part 4: Equipment protected by intrinsically safe "i"
GB/T4208-2008 enclosure protection grade (IP code)
GB/T9969-2008 General instructions for the use of industrial products
AQ 1043-2007 Mine Product Safety Sign Logo
MT 209-90 General technical requirements for electrical and electronic products for communication, testing and control of coal mines
MT 210-90 Basic test method for electrical and electronic products for communication, testing and control of coal mines
MT 211-90 Quality inspection rules for electrical and electronic products for communication, testing and control of coal mines
MT/T 154.2-1996 Coal mine electrical equipment product model preparation method and management method
For the harsh environment in the underground, the explosion-proof camera must have good performance of explosion-proof, high-temperature, dust-proof, waterproof, anti-corrosion, anti-vibration, anti-strong magnetic field and lightning protection. Almost 95% of the coal mines are relatively humid, and the waterproof grade must reach IP67; the mining products must be able to operate at high temperatures and anti-corrosion requirements in order to adapt to the humid, high pH environment.
In order to adapt to the harsh environment in the underground, the coal mine also has a choice of solutions. Since there is no light in the tunnel in the coal mine and infrared spotlights cannot be used, the CCD sensor of the low illumination camera is usually used. Secondly, because the working hours of the team are long, the power supply needs to be considered; and in order to ensure the work, it is necessary to select a large capacity. The battery, but the large capacity will lead to an increase in the difficulty of explosion protection. Therefore, the choice of battery capacity is the bottleneck of explosion-proof camera design. How to choose the power supply with large capacity, no leakage, adapt to high and low temperature and hot and humid environment, double protection redundancy, fast overcurrent cut-off switch function is a very difficult problem at present. According to the situation of various models in the industry, the small capacity battery is 750mA, most of the models are 1.5AH-2.0AH, and the current designed zui high capacity reaches 4AH.
Please refer to the Appendix
The coal mine security system is a large and complex system, including: digital explosion-proof video surveillance system, alarm system, integrated security management system. These security systems are centered on digital explosion-proof video surveillance systems, which are based on explosion-proof cameras and the protagonist of the entire monitoring system. Coal mines are a highly flammable and explosive place, and ordinary monitoring can cause sparks to explode. Therefore, normal monitoring can be achieved after the explosion-proof work is done.
Explosion-proof monitoring with access control system and anti-theft alarm system as the core, through network interconnection, effectively integrate all technical resources and means to form a set of automated, intelligent, comprehensive prevention capabilities, and meet the characteristics of coal mines. The system meets the requirements of all levels of the entire security system of the coal mine.
Early explosion-proof cameras were dominated by positive pressure. Intrinsically safe explosion-proof cameras are characterized by intrinsically safe handling of the camera's circuitry, and electrical line outputs or inputs are designed to be controlled to be less than enough to generate hydrogen to ignite and explode, so that it does not generate electricity during normal operation. Sparks, arcs and high temperatures to avoid detonating explosive materials. The unit cost of this type of explosion-proof camera structure is the biggest disadvantage, and it is also not conducive to future upgrades. The positive pressure type is a common structure of the early American explosion-proof camera products. The maintenance in use is quite inconvenient. If it is not carefully maintained, the risk of detonation is quite large. What this structure has seen so far, except for a handful of Taiwanese manufacturers still in manufacturing, has basically been completely eliminated by the explosion-proof camera industry.
Although there are many explosion-proof types of explosion-proof electrical appliances, they are not all suitable for use in explosion-proof cameras. For example, oil-filled type, sand-filled type, etc., can not be used on explosion-proof cameras.
The current mainstream method of explosion-proof cameras is the flameproof type. It is characterized in that a conventional ordinary camera is placed in a special casing which has the function of isolating the spark and arc generated by the electrical components in the casing from the explosive mixture outside the casing, and is capable of withstanding the explosive mixture entering the casing. The explosion pressure generated by the sparks and arcs of the electrical equipment, and the outer casing is not destroyed; at the same time, it can prevent the explosive products in the shell from being blasted to the explosive mixture outside the shell, and will not cause the explosive mixture to burn and explode outside the shell. Such a camera with a flameproof enclosure is an "explosion-proof explosion-proof camera". And this special casing is called "explosion-proof casing", we usually call it "explosion-proof camera shield".
With the development of security field requirements and the improvement of the technology level of modern core chips and their components, intrinsically safe explosion-proof cameras are increasingly favored by the market.
The internal structure of the explosion-proof camera is strictly standard, and it complies with the electrical equipment standards for explosive gas environments according to national standards. Known as the "Security Special Forces." It has been widely used in the fields of safety production supervision and supervision value method equipment and functional area safety supervision value method capacity building in various provinces and cities.
Farm Hvls Fan
The natural breeze generated by the farm Hvls fan blows on the human body, promoting the evaporation of sweat and taking away heat, cooling the body and bringing a cooling sensation. Usually, this cooling sensation can reach 5-8 ℃. The three-dimensional natural wind blown by Industrial Fans is more comfortable. On the one hand, three-dimensional blowing of the human body in all directions allows for a large evaporation area. On the other hand, humans have accumulated a warm experience of natural wind in nature. Once there is a change in wind speed, the human body naturally feels extremely comfortable and cool.
Farm HVLS Fan,Small HVLS Fan,Big HVLS Fans For Agriculture Applications,Commercial Agriculture Fans
Julai (Chongqing) ventilation equipment Co.,Ltd , https://www.julaifans.com
