What kind of safety is the tailings pond?
What is the "dangerous library" and "dangerous library", the reporter interviewed Miao Yu, deputy director of the Inner Mongolia Autonomous Region Safety Production Supervision Administration, to learn more about the classification standard of tailings storage safety. According to Miao Yu, the safety of the tailings pond is mainly determined according to the flood control capacity of the tailings pond and the stability of the tailings dam body. It is divided into four levels: dangerous reservoir, dangerous reservoir, disease warehouse and normal reservoir. Dangerous reservoirs refer to the tailings reservoir where safety is not guaranteed and dam accidents may occur at any time. For example, the tailings storage flood storage capacity is seriously insufficient. When the flood level is involved, the safety super high and the minimum dry beach length do not meet the requirements, and flooding may occur. The flood discharge system is severely blocked or collapsed, and it cannot be drained or drained. The capacity is drastically reduced; there are penetrating transverse cracks in the dam body, and a large range of piping and fluid deformation occurs. The dangerous warehouse must stop production and obtain emergency measures. The dangerous warehouse refers to the serious hidden dangers of the safety facilities. If not handled in time, it will lead to the tailings reservoir of the dam accident. For example, the drainage wells are inclined; the dam body shows signs of shallow sliding. The dangerous warehouse must be shut down immediately to eliminate the danger. A disease bank is a tailings pond that does not fully comply with design regulations but meets basic safe production conditions. For example, the location of the immersion line is locally high; the dam surface is partially swamped; the outer slope of the dam is not covered by the design, and the vegetation belongs to the disease bank. The disease bank should be rectified within a time limit. The normal warehouse also meets the following conditions: the tailings pond can meet the requirements of the specified safety super-high and minimum dry-shoal length when the flood level is involved; the buildings of the drainage system meet the design requirements and the working conditions are normal; the contour of the tailings dam The dimensions meet the design requirements, and the stability safety factor meets the design requirements; the dam body penetration control meets the requirements, and the operating conditions are normal.
Hi-Carbon Steel Cut Wire Shot, also named Reinforced Steel Shot, has a great effect on die casting parts which has a high hardness because Longlived Hi-Carbon Steel Cut Wire Shot also have high hardness while other Metal Abrasive can not meet.
Longlived Hi-Carbon Steel Cut Wire Shot is made from high quality hi-carbon steel wire by drawing, cutting and rounding. Its chemical composition is : Si:0.10-0.30%, Mn:0.40-1.20%, C:0.45-0.85%, S≦0.04%, P≦ 0.04%. Longlived Hi-Carbon Steel Cut Wire Shot is producted strictly in accordance with German standard VDFI8001/2009 and American standard SAEJ441,AMS2431. There are four types of hardness of Longlived Hi-Carbon Steel Cut Wire Shot and they are HRC 45-50, HRC 50-55, HRC 55-60 and HRC 58-63. As the development of advance technology of Longlived Metal, we have five shapes and they are as cut, G1, G2, G3 and even G4 condition, which could meet most requirement of clients. In addition, the size of Longlived Metal is from 0.25mm-2.5mm and size also could be customized if need. Longlived Hi-Carbon Steel Cut Wire Shot has a great fatigue life and it could be recycled from 3,500 times to 9,000 times. It could not only save cost but also make shot blasting faster and cleaner.
Hi-Carbon Steel Cut Wire Shot,High-Carbon Steel Cut Wire Shot Peening,High-Carbon Steel Cut Wire Shot Blasting,High-Carbon Steel Cut Wire Shot Distributor Longlived Metal Products Co ., Ltd , https://www.longlivedmetalproducts.com