Whether the high pressure blower works will be affected by current and voltage

Under the normal operation of the high pressure blower, the required rated voltage and rated current are determined according to the standard of the product's optimal performance. In this way, under the normal working voltage, the blower can run normally, and it can effectively function normally. With wind power, the service life will naturally be guaranteed, and the temperature of the pump itself can also be within the control range. If the voltage is too high, the bearing capacity of the pump motor is limited, and the motor may be burned. Therefore, the high pressure blower must be operated at the rated voltage during use. Then, if the voltage is too low or the rated voltage is not reached, the motor will run slowly and may not even run. It is usually said that the motor is often not moving, which results in the fan not working properly. In both cases, if the high-pressure blower is forced to work, it will bring great trauma to the fan, and even affect the life of the fan, and the more serious situation will directly lead to damage to the fan. Therefore, the working environment of the blower is affected by the current and voltage.
Engineers of high-pressure blower manufacturers recommend that you use the high-pressure blower in the factory. You should follow the instructions for use of the product and try to get the fan to work at the rated voltage and never reach the maximum power for your production.

Bisphenol S In Leather

Bisphenol S in leather, 4,4 '- dihydroxydiphenylsulfone is mainly used as a color fixing agent.In addition, it can be used as Plating Solution Additive, leather tanning agent, dispersant of disperse dyes for high-temperature dyeing, phenolic resin hardening accelerator, resin flame retardant, etc. It is also an intermediate of pesticides, dyes and additives. As a substitute of bisphenol A, it can be used as the Raw Material Of Polycarbonate, epoxy resin, polyester and phenolic resin, as well as the raw material of polysulfone and polyethersulfone. It is also used in the manufacture of color photographic materials, photographic contrast enhancers, thermal recording materials (color developers), daily surfactants and high-efficiency deodorants. Color fixing agent a (cibatexpa) can be prepared from bisphenol s. Handling and storage: wash the whole body thoroughly after handling. Remove contaminated clothing and wash before reuse. Prevent contact with eyes and skin.

Bisphenol S In Leather

4,4'-Dihydroxydiphenylsulfone,Bis(4-hydroxyphenyl) sulfone,Bisphenol S,SDP

Jiangxi Hongjiu New Material Technology Co.,Ltd. , https://www.hongjiutech.com