12V Mini Submersible Water Pump, DC Solar Submersible Pump Price

May 18, 2024

Model NO.: SFBP1-G1100-01
Motor: Water Cooled Motors to Extended Life
Pump Body: Thermoplastic
Protection: Anti-Airlock, Ignition Protected
Outlet Dimension: 29mm/1-1/8′′
Duty Cycle: Intermittent
Housing: Tough ABC Housing
Type: Inland and Coastal Boats
Material: Thermoplastic
Trademark: SEAFLO
Transport Package: 1PC/Inner Box; 40PCS/CTN; Seaworthy Strong Cartons
Specification: CE
Origin: Fujian, China
HS Code: 8413709190
Model NO.: SFBP1-G1100-01
Motor: Water Cooled Motors to Extended Life
Pump Body: Thermoplastic
Protection: Anti-Airlock, Ignition Protected
Outlet Dimension: 29mm/1-1/8′′
Duty Cycle: Intermittent
Housing: Tough ABC Housing
Type: Inland and Coastal Boats
Material: Thermoplastic
Trademark: SEAFLO
Transport Package: 1PC/Inner Box; 40PCS/CTN; Seaworthy Strong Cartons
Specification: CE
Origin: Fujian, China
HS Code: 8413709190
12v Mini Submersible Water Pump, DC Solar Submersible Pump Price
1100 GPH

Product Description
1. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
2. Totally submersible and ignition protected.
3. To all existing safety standards.
4. Water cooled motors for long life, with anti airlock design and moisture tight seals.
5. Snap-lock strainer base for easy installation and removal, and silent vibration free running
6. Includes comprehensive user manual with installation instructions and wiring diagram

Application
Typically used in boat hulls / bilges
Bait tanks
Ponds, pools, spas
Other applications where you have to remove water from
Note: These pumps are designed for intermittent use only, NOT designed for continuous use

How a Bilge Pump Works
Non-automatic bilge pumps offer traditional operation activated by a float or panel switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris. Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, are cost effective, have low amp draw and are easy to install. They are designed to fit in the lowest part of the bilge and only require discharge pipe work and electricity supply.

Backed SEAFLO's 1-Year Warranty!
Model Flow rate Volts Current Head Wire lead Outlet Dia N.W/G.W
SFBP1-G350-01 350 GPH 12V 1.8 A 3 m 1 m 19 mm/3/4" 0.33/0.40 kg
SFBP1-G500-01 500 GPH 12V 2.2A 3 m 1 m 19 mm/3/4" 0.33/0.40 kg
SFBP2-G500-01 500 GPH 24V 1.2 A 3 m 1 m 19 mm/3/4" 0.33/0.40 kg
SFBP1-G750-01 750 GPH 12V 2.5 A 3 m 1 m 19 mm/3/4" 0.33/0.40 kg
SFBP2-G750-01 750 GPH 24V 1.5 A 3 m 1 m 19 mm/3/4" 0.33/0.40 kg
SFBP1-G1100-01 1100 GPH 12V 3.5 A 4 m 1 m 29 mm/1-1/8" 0.38/0.44 kg
SFBP2-G1100-01 1100 GPH 24V 1.5 A 4 m 1 m 29 mm/1-1/8" 0.38/0.44 kg
FAQ
1. What is your MOQ?
100 pieces in general, but we also sale about 10--50 pieces for new costumers for their sample testing.
 
2. What about the delivery time?
It depends on your order quantity; it usually takes 15-25days upon receipt of your 30% deposit by T/T.
Sample can be delivered within 7days.
 
3. Can I buy different types in one container?
Yes, you can mix different types in one container.
 
4. Do you have oversea agents?
1. Of course. We have many agents overseas, such as Dacon Europe A/S in Denmark, A P Lifting Gear Company LTD in United Kingdom, SEAFLO MARINE & RV NORTH AMERICA, LLC in United States, Bin Alshaikh Abobaker for Treading in Yemen, Williams Industrial Products Pty Ltd/Marine Systems Australia and SEAFLO AUS pty in Australia, Azzi Sport Marine S.A.R.L in Lebanon, SARAY DENIZ MALZEMELERI YATCILIK SAN.TIC.LTD.STI in Turkey, RECAMBIOS MARINOS S.L in Spain, DINO CO.,LTD in South Korea.
2. Welcome oversea agents!
 
5.Do you accept OEM/ODM
Yes. We are also the OEM supplier of many famous companies, such as WALMAT.
 
6. What is your terms of payment.
T/T, 30% in advance, balance against B/L copy.
 
7. What is your warranty?
5 years, and within 24 hours reply will be provided to solve customers' problems.
 
8. What is your port of loading?
Fuzhou Port.  So the price what we quote you is FOB Xiamen. 12v Mini Submersible Water Pump, DC Solar Submersible Pump Price
1100 GPH

Product Description
1. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
2. Totally submersible and ignition protected.
3. To all existing safety standards.
4. Water cooled motors for long life, with anti airlock design and moisture tight seals.
5. Snap-lock strainer base for easy installation and removal, and silent vibration free running
6. Includes comprehensive user manual with installation instructions and wiring diagram

Application
Typically used in boat hulls / bilges
Bait tanks
Ponds, pools, spas
Other applications where you have to remove water from
Note: These pumps are designed for intermittent use only, NOT designed for continuous use

How a Bilge Pump Works
Non-automatic bilge pumps offer traditional operation activated by a float or panel switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris. Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, are cost effective, have low amp draw and are easy to install. They are designed to fit in the lowest part of the bilge and only require discharge pipe work and electricity supply.

Backed SEAFLO's 1-Year Warranty!
Model Flow rate Volts Current Head Wire lead Outlet Dia N.W/G.W
SFBP1-G350-01 350 GPH 12V 1.8 A 3 m 1 m 19 mm/3/4" 0.33/0.40 kg
SFBP1-G500-01 500 GPH 12V 2.2A 3 m 1 m 19 mm/3/4" 0.33/0.40 kg
SFBP2-G500-01 500 GPH 24V 1.2 A 3 m 1 m 19 mm/3/4" 0.33/0.40 kg
SFBP1-G750-01 750 GPH 12V 2.5 A 3 m 1 m 19 mm/3/4" 0.33/0.40 kg
SFBP2-G750-01 750 GPH 24V 1.5 A 3 m 1 m 19 mm/3/4" 0.33/0.40 kg
SFBP1-G1100-01 1100 GPH 12V 3.5 A 4 m 1 m 29 mm/1-1/8" 0.38/0.44 kg
SFBP2-G1100-01 1100 GPH 24V 1.5 A 4 m 1 m 29 mm/1-1/8" 0.38/0.44 kg
FAQ
1. What is your MOQ?
100 pieces in general, but we also sale about 10--50 pieces for new costumers for their sample testing.
 
2. What about the delivery time?
It depends on your order quantity; it usually takes 15-25days upon receipt of your 30% deposit by T/T.
Sample can be delivered within 7days.
 
3. Can I buy different types in one container?
Yes, you can mix different types in one container.
 
4. Do you have oversea agents?
1. Of course. We have many agents overseas, such as Dacon Europe A/S in Denmark, A P Lifting Gear Company LTD in United Kingdom, SEAFLO MARINE & RV NORTH AMERICA, LLC in United States, Bin Alshaikh Abobaker for Treading in Yemen, Williams Industrial Products Pty Ltd/Marine Systems Australia and SEAFLO AUS pty in Australia, Azzi Sport Marine S.A.R.L in Lebanon, SARAY DENIZ MALZEMELERI YATCILIK SAN.TIC.LTD.STI in Turkey, RECAMBIOS MARINOS S.L in Spain, DINO CO.,LTD in South Korea.
2. Welcome oversea agents!
 
5.Do you accept OEM/ODM
Yes. We are also the OEM supplier of many famous companies, such as WALMAT.
 
6. What is your terms of payment.
T/T, 30% in advance, balance against B/L copy.
 
7. What is your warranty?
5 years, and within 24 hours reply will be provided to solve customers' problems.
 
8. What is your port of loading?
Fuzhou Port.  So the price what we quote you is FOB Xiamen.

Stamping Parts

Deep Stamping Products, it can also be called Deep Metal Stamping Parts, Deep Processing Metal Stamping Parts, or Deep Processing Stamping Parts.

The die used for stamping is called a stamping die, or stamping dies for short. A die is a special tool that processes materials (metal or nonmetal) into the desired parts in bulk. A stamping die is very important in stamping, without meeting the requirements of a stamping die, batch stamping production is difficult to carry out; Without advanced stamping die, the advanced stamping process can not be realized. The stamping process and die, stamping equipment and stamping materials constitute the three elements of stamping processing, only they can be combined with each other to get stamping parts.

Stamping is a metal cold deformation processing method. Therefore, it is called cold stamping or sheet metal stamping or stamping for short. It is one of the main methods of metal plastic processing (or pressure processing), and it also belongs to material-forming engineering technology.

Dongjie can produce stamping parts according to your drawings. Dongjie has more than 1500+ sets of molds and has a professional technical and design team. We can meet your requirements as much as possible. You are welcome to come to consult your drawings.

Metal Stamping Parts 9

Stamping Parts,Metal Stamping Parts,Drawing Metal Stamping Parts,Carbon Steel Metal Stamping Parts

Anping County Dongjie Wiremesh Products Co., Ltd. , https://www.dongjiewire.com