Audi A3 front airbag hidden danger 4S shop is about to recall
The Audi A3 is a compact sedan. The imported models are equipped with 1.8T and 2.0T engines. China Netcom learned from the AQSIQ Defective Product Management Center that when an airbag was deployed on an A3 model overseas, the airbags in front of the front passengers broke and there was a safety hazard, so 3 vehicles will be recalled. Domestic models of the same type. This time, FAW-Volkswagen Automotive Co., Ltd. recalled sales of some Audi A3s for the 2014 and 2015 models produced from August 27, 2014 to September 11, 2014, totaling three vehicles. Vehicles within the scope of the recall, due to an accident occurred on a vehicle of the same type in an overseas market, caused the front airbag to open, and the airbags in front of the front passengers broke down, posing a potential safety hazard. For the relevant information of this recall incident, China Netcom called the FAW-VW Audi customer service center official 400 service hotline as a consumer and consulted. The other party stated that it has received a manufacturer's recall notice and that the recall of some models will begin on the same day. At the same time, you can also call the official customer service hotline and provide the frame number of the vehicle to confirm whether the vehicle involves the recall. Netcom also consulted authorized dealers to inquire about the implementation of the vehicle recall plan. Some customer service personnel stated that we are currently implementing a recall announcement that we are about to implement and that there are solutions to potential safety hazards. In order to further clarify the root cause of this case, the recalled parts of the same batch will be recycled and replaced with new ones. Front passenger airbags enable more in-depth analysis of the same batch of parts to eliminate safety hazards.
Tower Crane gear mainly including 19/38/99 teeth gear, bevel gear, Tower Crane Sun Gear, and so on, which are the critical
parts of the tower crane reducer. 19 teeth gear and 38 teeth gear are
connected with two motor shaft repectively, which are connected with 99
teeth gear. The speed is reduced by the transmission of gears.
A bevel gear is a type of gear that has teeth cut on a conical surface. It is commonly used in tower cranes to transmit power between the vertical and horizontal shafts. Bevel Gear,Tower Crane Sun Gear,Crane Pinion Gear,Tower Crane Transmission Gear,Tower Crane Drive Shaft SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.syconstructionhoist.com
In a tower crane, the bevel gear is typically used to change the direction of rotation. The vertical shaft, which is connected to the motor, rotates vertically, while the horizontal shaft, which is connected to the crane's boom, rotates horizontally.
The bevel gear consists of two gears with intersecting axes. The teeth on the gears are cut at an angle, allowing them to mesh smoothly and transmit power. The gear ratio of the bevel gear determines the speed and torque of the rotation.
The bevel gear in a tower crane is designed to withstand heavy loads and provide efficient power transmission. It is usually made of high-strength steel to ensure durability and reliability in demanding crane operations.
Overall, the bevel gear plays a crucial role in the functioning of a tower crane by enabling the transfer of power and changing the direction of rotation between the vertical and horizontal shafts.