Industrial Honeycomb Air Dryer Equipment Dehumidifier

Model NO.: HDDR
Type: General
Dew-Point Temp.: -10 ~ +5 Degree C
Cooling Water Pressure: 3~5bar
Trademark: Hadrdega
Transport Package: Wooden Case
Specification: 3phase, 230/400/460V, 50/60Hz
Origin: Tianjin, China
HS Code: 841939909


Application

HDDR series mould moisture dehumidifier are designed to remove the the moisture from condensing on the mould surface. Forming of moisture sweat on the mould surface is due to the use of chilled water for reducing the moulding cycle time, particularly while moulding of the PET preforms. To bring about the moisture sweat on the mould surface is because the mould surface temperature is lower than the dew-point temperature of surrounding air, thus the water vapor comes into being, then causes corrosion of mould and effects quality of moulding parts as well as productioin efficiencies. This series of machine uses honeycomb rotor to carry out dehumidifying function, which generates a dry airflow with dew-point ranging from +5ºC~-10ºC, and ensures the surrounding air of mould remaining in a low dew-point temperature. It provides constant low dewpoint surrounging air to the mould surface all year round without being infuenced by the change of seasons.

Technical Specifications

Model

 

HDDR-500

HDDR-1000

HDDR-1500

HDDR-2000

Regen. Heater

kw

4

7.2

15

24

Regen. Blower

kw (50hz/60hz)

0.4/0.5

0.75/0.85

2.2/2.6

2.2/2.6

Process Blower

kw(50hz/60hz)

0.75/0.85

1.5/1.8

1.5/1.8

1.5/1.8

Process Air Flow

m3/hr

500

1000

1500

2000

Process Pipe Diameter

inch

4

5

8

8

Regen. Pipe Diameter

inch

2

2.5

4

4

Water inlet Connection

 

3/4" PT

3/4" PT

3/4" PT

2" PT

Ave. Process Air Temp.

ºC

30

30

30

30

Dew-point Temp.

ºC

-10 ~ +5

-10 ~ +5

-10 ~ +5

-10 ~ +5

Cooling Water Flow

L/min

45

90

135

180

Cooling Water Pressure

bar

3~5

3~5

3~5

3~5

Dimensions

mm (LxWxH)

700x650x1730

805x800x1780

1075x1150x2040

1075x1300x1940

Weight

kg

260

335

350

450

Note: 1. Noise level ≤85dB (A)

2. Condition for Open-loop application; Ambient dry bulb temp.≤30ºC, relative moisture ≤70%.

3. Cooling water required temp.: 7~10ºC.

4. Power: 3Φ, 230/400/460V, 50/60Hz

Model Selection Guide

Model HDDR-500 HDDR-1000 HDDR-1500 HDDR-2000
Cavity Number 12 16 24 32 48 56
Cavity Array (2x6) (2x8) (4x6) (4x8) (4x12) (4x14)
Cavity Distance Standard Standard Standard Standard Standard Standard
Max. Shot Weight
(kg/hr)
200 270 400 420 560 560
Features of Hadrdega Mould Moisture Dehumidifier

1.Accurate control and display of regenerative temp. by using P.I.D. control.

2.Honeycomb rotor is used to ensure constant air dehumidifying effect.

3.Microprocessor board is fitted to indicate machine running status and to diagnose malfunctions.

4.Motor overload and phase reverse alarm fuctions are included.

5.Return air cooling and filtering are included.

6.Under normal state and atmospheric conditions, the humidity content of air can be controlled exactly all year round.

7.Inhibits corrosion and prolongs service life of the mould, and yet reduces mouding cycle time.

8.Air temperature generated by this series of machine is about 30ºC, this ensures moisture condensation in the moulding area will not occur on the view window of the moulding machine.

PHE Spare Gasket For BARRIQUAND

Barriquand Heat Exchangers Gaskets,Barriquand Gasket Heat Exchanger,Barriquand Phe Gasket,Phe Gasket For Barriquand

Dongguan Runfengda F&M Co., Ltd , https://www.dgrunfengda.com