China-40kw-Hf-Induction-Welding-Machine-for-Cutting-Pick-in-Mining-Industry

June 24, 2020

Cutting pick is a kind of widely-used consumptive mining tool, this sort of cutting pick is very frightened of the sandstone, even though the hardness of sandstone is not high, its wear on the cutting pick is very severe, in the course of mining a coal mine, the biggest headache is not the hard rock but sandstone, run into the hard rock when we can use the enhanced cutting tooth to mine, but as for sandstone strata , in face it is not hard, just badly worn, so a lot of drill bit manufacturers pay attention to this circumstance to make the cutting tooth stronger with Super-Tech cutting pick soldering heat treatment equipment so as to improve the service life of cutting pick,


Application:
This kind of induction welding furnace for cutting pick also used for the other tools, such as:
    Cutting tool, drilling tool, cutter, wood cutting tool, lathe tool, drill bit, brazing, reamer, milling cutter, drill, sawblade, sawtooth, eyewear industry frame, welding of steel tube and copper tube, cutting tooth welding,same and heterogeneity metal soldering, compresser, pressure meter, relay contact point, the composite welding for bottom of different material stainless pan, soldering for copper wire of transformer winding, storage ( welding of penumatic nozzle, stainless steel ware, kitchen ware)

Advantages:
    adopt IGBT as the main part, full bridge inversion.100% duty cycle to be continuous working for 24h without stop.Perfect protection function, high reliable.It can remotely control and connect infrared temperature measurement, realize automatic temperatuer control, improve heating quality and simplify workers operation.Instead of oxyacetylene flame, coke furnace, salt bath oven, gas furnace, oil furnace and other heating method.Frequency automatic tracking and multi-loop control are adopted.Small in size, light in weight, easy installation, convenient to operate.It has constant current and constant power control function, higher heating efficiency.Display output power, frequency, current.The installation is simple, it only needs electricity and water.Mini style, only 50-70kg.Automatic control can adjust the power and time of heating and heat preservation process, which is beneficial to improve the repeatability of heating quality and simplify the operation of workers.


Parameters:

 
Working Power Three phase380V/50-60Hz
Cooling water pressure(mpa)/water flow(m³/H) 0.2Mpa/>10m2/H
Maximum output power(kw) 70
Max. input current(a) 80
Oscillation frequency(KHz) 15-30KHz
Generator size(cm)/weight(kg) 56*27*47 60kg
Transformer size(cm)/weight(kg) 40*28*39 40kg
Output oscillation power 40KVA 
Output oscillation frequency 30-100KHZ
Max. output power 40KVA
Heat insulation current 10-150A
Duty cycle 100%
Heat time 1-99s (automatic state)
Heat preservation period 1-99s (automatic state)
Water temperature <40°C

The cleaning machine is a fully automatic continuous double-station cylinder head (cylinder) cleaning equipment, with advanced structure, high production efficiency, clean and so on. It is mainly used to clean the air passage, oil passage, water passage and exterior of cylinder head (cylinder block) after machining line, air drying, and remove chips and waste oil. In the process of cleaning the workpiece, there is no need for manual assistance, and it moves forward to the end of the cleaning step in turn (there are two workpieces in each workstation during the cleaning process).
The cleaning machine includes upper and lower workpiece mechanism, workstation conveying mechanism, cleaning mechanism, blowing and drying mechanism, sewage treatment device, self-lubricating mechanism, water mist collection mechanism, liquid level alarm device, etc.

Automatic Casting Cleaning Aluminum Production Line

Sand Core Machine,Automatic Casting Cleaning Line,Automatic Casting Cleaning Aluminum Production Line,Automatic Casting Cleaning Aluminum Production Line

Shandong ShengKaiYuan Intelligent Technology Co.Ltd , https://www.cncastmachine.com