Determining the performance of a water vapor compression chiller
Calculation of Compressor Performance for Different Compression Processes In order to determine the performance of a water vapor compression chiller and compare it with a Freon-type chiller, the following assumptions are made: 1) only the compressor consumes electric power in the chiller; 2) both the evaporator and the condenser It is an ideal heat exchanger and the expansion device has no loss; 3) The water vapor compressor can be cooled as required. On this basis, the water vapor is regarded as the ideal gas and the actual gas respectively, and the compressor power consumption of the three compression processes using the isentropic compression process, the saturated multi-variable compression process and the ordinary multi-variable compression process is calculated. In the calculation of the coefficient of performance (COP) of the refrigerator, the mass flow rate of water vapor in the refrigerator is selected to be 0.5 kgs, so its cooling energy. Compression process If the compression process proceeds very quickly and there is no loss inside, and there is no heat exchange with the outside world, this compression process can be regarded as an isentropic compression process. Assuming that the water vapor is an ideal gas, the compression work w and the shaft work w required to compress the water vapor from the saturation pressure P at the initial evaporation temperature to the saturation pressure P at the condensation temperature can be calculated as follows: where k is equal The entropy compresses the adiabatic index, and the value of P(Pa) can be calculated from the evaporation temperature T(K) and the condensation temperature T by the following formula until C is constant. If the water vapor is regarded as the actual gas, and the inlet pressure Pe and the outlet pressure Pc of the compressor are known, the compression work wc and the shaft work wa required for the isentropic compression process can be calculated as follows: the data of the steam is calculated by the formula By fitting, the obtained fitting formula is as follows: The coefficient of performance (COP) of the water vapor compression refrigerator can be calculated by the following formula: for the isentropic compression process, the water vapor is regarded as the compressor work of the ideal gas and the actual gas, respectively. Comparison of the performance of the refrigerator and the performance of the refrigerator.
Auto Recovery Rapid Door
Zippered Quick door Features
Open: 1.2-2.0m/Sec
High airtight energy efficient : Zipper patented technology and curtain rail technology combines high seal ability for maximum energy efficiency
Self-healing maintenance cost savings :When the door by the impact and dislocation occurs , repeat mosaic patented technology that is deralling repair system starts automatically , without any manual and automatic reset to its original state force to effectively reduce maintenance time saving cost
High security : Curtain soft and elastic , without any load at the bottom of the door to change , to ensure that the operator in an emergency state in the collision to the door when the operation will not cause harm
Push pull dual hinge system :unmatched safety record and absolute tightness in push pull twin shaft system, loading close dependence and the curtain at the bottom of the traditional fast door to achieve , you can drive dual axis system so that the upper curtain sprocket perfect bite does not depend on the door of its own weight can be achieved fast closing , this patented technology to avoid the hard parts usage of
More than one million times the durability performance : speed doors reduce the use of materials , easy to wear , strong and flexible curtain is very durable , can withstand million of opening and closing operation ,
in the use of some products has reached 500 million times for opening and closing
The soft curtain anti-collision fast door has simple structure design, which is beneficial to stable operation, reduces the frequency of repairing and replacing wearing parts, effectively improves the durability and service life of the equipment, and the curtain can be derailed in the event of an accidental impact, and during the ascent Automatic reset, no need to manually repair and reset the whole process. Self Recovery High Speed Door, air shower door, pharmaceutical clean room door SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfarrd.com
Heating devices are included on both sides of the column.
The structural design of this product is characterized by trouble-free operation up to 150,000 times per year. It has the highest practicality and the lowest maintenance cost.