Model NO.: GY-40AB
Duty Cycle: 100%
Application: Heating, Forging, Melting, Hardening and etc
Cooling: Water
Work Condition: Continuously for 24hours
Work Principle: Electromagnetic Induction Heating
Heat Transfer Surface: Tubular Heat Exchanger
Power Source: Electric
Trademark: GY
Transport Package: Wooden Box
Origin: Dongguan, China
HS Code: 85144000
Model NO.: GY-40AB
Duty Cycle: 100%
Application: Heating, Forging, Melting, Hardening and etc
Cooling: Water
Work Condition: Continuously for 24hours
Work Principle: Electromagnetic Induction Heating
Heat Transfer Surface: Tubular Heat Exchanger
Power Source: Electric
Trademark: GY
Transport Package: Wooden Box
Origin: Dongguan, China
HS Code: 85144000
High Frequency Induction Heating Machine For Brazing Short-circuit RingsMajor Features:
1. It adopts the most advanced MOS, IGBT frequency conversion control technologies to ensure the
   high efficiency and maximum output power.
2. It has the constant current and power control function, which can significantly optimize metal heating
   process, realize the high efficient and fast heating and bring into play the superior performance of the       products.
3. It has the function of three-stage time setting represented by heating-heat preservation-cooling.
   Furthermore, the power for heating and heat preservation is available for independent regulation,
  which can facilitate the heating and heat preservation, which is applicable to places requiring bulking
  and repeated heating.
4. A maximum ten types fault protection and display of over-current, over-voltage, water shortage and
  phase missing can provide higher reliability and durability.
5. It is safe and reliable, and requires no equipments of ten thousand voltage, and thus can ensure
   the safe operation.
6. The comprehensive full load design is available for 24-hour continuous operation.
7. It is available for ultraviolet temperature detection, which can realize the automatic control of
   temperature, improve the heating performance and simplify the manual operation.
Application of Induction Heater:
A. Heating (hot forging, hot fitting and melting):
B. Heat Treatment (surface quench)
C. Welding (braze welding, silver soldering and brazing)
D. Annealing (tempering and modulation)
Induction Heater Advantage:
Nearly 20 years experience, stable and goods performance
CE,SGC,FCC,ROSH Â certificated
Cooperated with GM,VOLVO,HONDA and so on.
Suitable for a large range, heating, quenching, forging, melting, soldering and so on.
Less environment pollution
High efficiency,high output&high reliability
Small size &light weight
Parameter:
Model |
GY-40AB (Three phase) |
work power |
340V-430V |
input current |
41A |
Fluctuating output power |
40KW |
fluctuating frequency |
30-80KHZ |
output current |
200-1800A |
the flow rate of cooling water |
0.08-0.16Mpa 7.6L/Min |
water temperature protection point |
40C |
product size |
main:620x250x530mm |
transformer:480x260x410Â mm |
net weight |
main : 34.5kgs |
transformer : 31.5kgs |
Delivery Time: within 5 workdays.
Shipping Term:By sea,By air,by express.
Extra accessories accept choose, Â
1>Chiller
2>Customer design CoilÂ
3>Infrared Thermometer
4>Back-up Electronic Boards
5>Forging Furnace,Melting Furnace,Hardening Fixture
About service question:
Q: Why choose GuangYuan Company?
A: We are manufacture which had in this filed for nearly 20 years.No matter quality,price,service,delivery time,we all have large advantage.
Q:How to choose suiteble machine?
A:You can tell us your application,need forging,hardening,welding,melting or other,pass me workpiece material & size,Temperature requirement and heating time requirement.Then we will recommend fit machine for you reference.
Q:How about the machine delivery time?
A: Small machine delivery time is 3~7 workdays.Big machine delivery time 15~25 workdays.
Q:How about the machine warranty?
A:Our goods support one year warranty not by personal purpose,support technical service all life.
During the warranty,if machine have problem need change spare parts,we can replace for you charge free.

Â
High Frequency Induction Heating Machine For Brazing Short-circuit RingsMajor Features:
1. It adopts the most advanced MOS, IGBT frequency conversion control technologies to ensure the
   high efficiency and maximum output power.
2. It has the constant current and power control function, which can significantly optimize metal heating
   process, realize the high efficient and fast heating and bring into play the superior performance of the       products.
3. It has the function of three-stage time setting represented by heating-heat preservation-cooling.
   Furthermore, the power for heating and heat preservation is available for independent regulation,
  which can facilitate the heating and heat preservation, which is applicable to places requiring bulking
  and repeated heating.
4. A maximum ten types fault protection and display of over-current, over-voltage, water shortage and
  phase missing can provide higher reliability and durability.
5. It is safe and reliable, and requires no equipments of ten thousand voltage, and thus can ensure
   the safe operation.
6. The comprehensive full load design is available for 24-hour continuous operation.
7. It is available for ultraviolet temperature detection, which can realize the automatic control of
   temperature, improve the heating performance and simplify the manual operation.
Application of Induction Heater:
A. Heating (hot forging, hot fitting and melting):
B. Heat Treatment (surface quench)
C. Welding (braze welding, silver soldering and brazing)
D. Annealing (tempering and modulation)
Induction Heater Advantage:
Nearly 20 years experience, stable and goods performance
CE,SGC,FCC,ROSH Â certificated
Cooperated with GM,VOLVO,HONDA and so on.
Suitable for a large range, heating, quenching, forging, melting, soldering and so on.
Less environment pollution
High efficiency,high output&high reliability
Small size &light weight
Parameter:
Model |
GY-40AB (Three phase) |
work power |
340V-430V |
input current |
41A |
Fluctuating output power |
40KW |
fluctuating frequency |
30-80KHZ |
output current |
200-1800A |
the flow rate of cooling water |
0.08-0.16Mpa 7.6L/Min |
water temperature protection point |
40C |
product size |
main:620x250x530mm |
transformer:480x260x410Â mm |
net weight |
main : 34.5kgs |
transformer : 31.5kgs |
Delivery Time: within 5 workdays.
Shipping Term:By sea,By air,by express.
Extra accessories accept choose, Â
1>Chiller
2>Customer design CoilÂ
3>Infrared Thermometer
4>Back-up Electronic Boards
5>Forging Furnace,Melting Furnace,Hardening Fixture
About service question:
Q: Why choose GuangYuan Company?
A: We are manufacture which had in this filed for nearly 20 years.No matter quality,price,service,delivery time,we all have large advantage.
Q:How to choose suiteble machine?
A:You can tell us your application,need forging,hardening,welding,melting or other,pass me workpiece material & size,Temperature requirement and heating time requirement.Then we will recommend fit machine for you reference.
Q:How about the machine delivery time?
A: Small machine delivery time is 3~7 workdays.Big machine delivery time 15~25 workdays.
Q:How about the machine warranty?
A:Our goods support one year warranty not by personal purpose,support technical service all life.
During the warranty,if machine have problem need change spare parts,we can replace for you charge free.

Â
Small Hole Positioning Production Line
Precision Flatbed die cutting line also called as [Small hole position production line[. Flying Man series Die Cutting Machine is mainly used for backlight production lines, CNC hole position production line, specialized for multiple hole position die cutting products, use Japanese servo motor, touch screen control panel and PLC program control, combined the technology of the United States, Japan, South Korea, Taiwan made high precision die-cutting machine, the die cutting on the market has been very widely used, especially suitable for the repeatedly die cutting technology of complex product.
This production line is suitable for all kinds of molds, wood plastic molds, corrosion molds, engraving molds, hardware molds, QDC composite molds, to solve all kinds of complex processes.
Unique hole positioning and timely correcting function to ensure repeated die-cutting and accurate positioning, punching accuracy control within 0.04mm.
The main engine adopts intermittent lubrication with centralized oil supply, and the oil is circulated inside the machine. The main moving parts are fully lubricated during working, and the environment of the dust-free workshop is not polluted.

Flatbed Die Cutter,Perforation Die Cutting,Flatbed Die Cutting Punching Line,Small Hole Positioning Production Line
Suzhou Flying Man Assembly Automation Co., Ltd. , https://www.frmancuttingmachine.com