21 to 22 early morning, a ferocious raging storm Jiangcheng, the Yangtze River and river water levels rose rapidly. Anti-finger at all levels promptly require the polder area pumping station to fully open the pump and discharge water in time to discharge the rainwater to ensure the people's property safety in the low lying areas such as farmland, roads and villages within the polder area. About 2 o'clock on the 22nd, Yijiang Flood Control headquarters asked the southern polder area pumping station ready to boot drainage. After receiving the order, all drainage pump station duty staff immediately boot all drainage, Maple Bridge, Lugang, Matang, Xiao Jingshan, black sand lake drainage pump station 47 47 total 45 sets of pumps opened. Southern polder area of ​​151 square kilometers, surrounded by stone? Fair, Lianhe Fair, Hong Kong West Fair and other smaller polders. In order to do a good job of flood control preparations, Yijiang Flood Control Headquarters as early as before the flood season on the dike in the region were examined, focusing on inspection of landslides and other prone to accidents prone to all pump stations were tested . Yesterday morning opened the 45 pump all the normal operation. "All pumping stations are on duty 24 hours on standby." Wang Yijiang flood control headquarters told reporters, in addition to the flood command issued a boot order, the pump station can be booted in a timely manner under the rain. Each pumping station has Wusong elevation of water, as long as the water reaches this standard can boot drainage. Wusong around the water mark is not exactly the same, such as the Wusong Lugang elevation of 7.1 meters. The large-scale boot drainage effectively protected the farmland, villages, industrial areas and roads in the polder area from flooding.
Metal 3D Printing - Slm / Dmls
METAL 3D Printing - SLM / DMLS
The two technologies have many similarities: both use laser scanning and selectively fuse (or melt) metal powder particles, glue them together and build them layer by layer. Similarly, the materials used in both processes are granular metals.
The difference between SLM and DMLS is due to the basis (and patents) of the particle bonding process: SLM uses metal powder with a single melting temperature and completely melts the particles, while in DMLS, the powder is composed of materials with variable melting points at high temperatures Fusion at the molecular level.
Bering 3D provides 3D printing services for various metal materials such as stainless steel, die steel, titanium alloy, aluminum alloy, and bronze.
Metal 3D Printing - Slm / Dmls,3d Printing Service Metal ,Metal 3d Printing Service Stainless Steel,3d Printing Service Metal Aluminum
Ningbo Rongna Technology Co.,Ltd , https://www.prototyping-products.com