ON Semiconductor Introduces First Floating Regulated Charge Pump
Our main products are plastic Commodity Mould such as Chair Mould , Table Mould , Basket Mould , Crate Mould , Bucket Mould and Other plastics products molds. We continuously accumulate the experience of plastic injection mold making. With more than 10 years experience, we are skill of making many kinds of plastic injection molds with internationally advanced level.
PET perform mould Steel material:
Optimized preform design ensures dynamic bottle blowing success.
Appliancations include: Aseptic, cold fill, hot fill, CSD, dry food and
sancks jars etc. PET Packing Mould Taizhou Huangyan YouGo Mould & Plastic Co., Ltd , http://www.plastic-moulds.com
The output voltage of most charge pumps is usually referenced to ground, and the output voltage of the NIS6201 can be referenced to any bus voltage, or to the bus voltage, to float bias or to supply power on any bus voltage. Designers can generate any bias voltage with a minimum of external components.
The NIS6201 includes a linear regulator and a multi-function charge pump that allows the bias voltage source to be converted from a ground reference to a higher voltage and can handle any required isolation voltage up to several hundred volts. The device features adjustable voltage output and thermal protection.
Sue Nee, marketing manager for ON Semiconductor's integrated integrated products, said, "The NIS6201 is a step forward in the design of the general power supply for the economy, or the auxiliary power supply that is required to power the integrated circuit for integrated PWM control ICs. If in the late design stage Need to add an output voltage, NIS6201 should be a quick and simple solution."
The NIS6201 is available in a lead-free SO-8 package and is priced at $0.53 per unit in 10,000-unit quantities. Samples and demo boards are available.
PET perform mould hot-runner with valve gate
Hot Runner Enploys PID system which features automatic compensation Coil Heater: Hotset (Germany) PC-VG Series Valve Grate Hot Runner System. Valve piston with long-lived rubber seal Section or independent control nozzle
2316 steel for core/cavity
Swedish ASSAB STAVAX S136 for neck, high grade with hard treatment up to HRC 50°-54°
P20 Tool steel HRC27-32. for mould plate, surface Ni plated, stainless
Hardness: HRC42 for Cavity, HRC45 for Core Interchangeable parts for
every cavity. Machine tolerance standards 0.005mm-0.003mm. 90% of mold
parts interchangeable with injection mold machines.
Mold life: 3million shots
90% of mold parts interchangeable with injection mold machines.
Guaranteed preform wall thickness concentricity:±0.0075mm(L=100mm).
Specification:
8cavities,12cavities,16cavities,24cavities,32cavities,48cavities,
64cavities and 72cavities.Neck finish:1716,1810,30/25,1881,29/25,26/22
and 38mm.
We are the professional preform mould manufacturer and supplier in China, we can provide you the high quality PET Preform Mould, please feel free to contact us.