Used car brake pads wear often overlooked
Used car brake pads wear often overlooked Often there is still a car careless car owners will forget, Xiao Bian and you today tutoring this knowledge. Fault: Effect on braking effect A Geely Panda is undergoing a "health check" at the 4S shop. The appraiser pointed at the brake pads and said: “The thickness of the brake pads is generally 1.2~1.5cm. When the car is opened for two or three years, it usually wears to a thickness of about 1cm. At this time, it needs to be replaced.†And the gill car being evaluated, the brakes The sheet wear is small, and its thickness is 1.2 cm. In the end, Xiao Bian concludes that the wear of the brake pads will rarely be noticed. In general, when we purchase used cars, we will only open the appearance of the engines, tires, and interior and exterior of vehicles, but put these “brake pads, engines, ignition wires, etc.†Invisible parts are ignored. Do not underestimate these parts, if the inspection is not careful will cause security risks. Xiao Bian recommendations: If the thickness is less than 1 cm, or there are obvious scratches, it is recommended to replace, otherwise there will be brake effects decline, and even the consequences of wheel lock. The conveyor has the following characteristics. Conveyor Belt,Rubber Conveyor Belt,Conveyor Belt System,Used Conveyor Belt Shijiazhuang EFU Machinery Co., Ltd , https://www.efuequip.com
â‘ Higher movement speed can be used, and the speed is stable.
â‘¡Has higher productivity.
â‘¢Under the same productivity, light weight, small size, low cost and low driving power.
â‘£The parts of the transmission machinery have low load and small impact.
⑤Compact structure, easy to manufacture and maintain.
â‘¥The fixed action of the conveying goods line is single, which is convenient to realize automatic control.
⑦The load is even during the working process, and the power consumed is almost unchanged.
According to the different installation methods,
Conveyors can be divided into two categories: fixed conveyors and mobile conveyors. Fixed conveyor means that the entire equipment is fixedly installed in one place and cannot be moved. It is mainly used for fixed transportation occasions, such as dedicated docks, goods movement in warehouses, transportation between factory production processes, receipt of raw materials and distribution of finished products, etc. It has the characteristics of large conveying capacity, low unit power consumption and high efficiency. Mobile conveyor means that the entire equipment is installed on wheels and can be moved. It has the characteristics of strong mobility, high utilization rate, and timely arrangement of transportation operations to meet the requirements of loading and unloading. This type of equipment has a low transportation volume and a short transportation distance, and is suitable for small and medium-sized warehouses.
According to different structural characteristics,
Conveyors can be divided into conveyors with flexible traction members and conveyors without flexible traction members. The working feature of the conveyor with flexible components is that materials or goods are transported in a certain direction by the continuous movement of the traction member under the action of the traction member. The traction component is a closed system of reciprocating cycle, usually part of the conveying goods, and the other part of the traction component returning, common belt conveyors, chain conveyors, bucket elevators, suspension conveyors and other conveyors without flexible components The characteristic of the work is to use the rotating motion or vibration of the working components to transport the goods in a certain direction. Its conveying components do not have the form of reciprocating circulation. Commonly include pneumatic conveyors, screw conveyors, and vibrating conveyors.
According to different forms of conveying cargo force,
Conveyors can be divided into mechanical, inertial, pneumatic, hydraulic and other categories;
According to the nature of the goods,
Conveyors can be divided into continuous conveyors and intermittent conveyors. Continuous conveyors are mainly used for the conveying, loading and unloading of bulk goods. Intermittent conveyors are mainly used for the transportation of containerized unit goods (ie packaged goods), so they are also called unit load conveyors.