Wq Series Submersible Fountain/Garden/Pond Water Pump

September 27, 2018

Model NO.: WQ
Type: Jet Pump
Application: Sewage Pump
Theory: Axial Flow Pump
Position of Pump Shaft: Vertical Pump
Influent Type of Impeller: Single Suction Pump
Working Pressure: Low Pressure Pump
Impeller Number: Single-Stage Pump
Trademark: SUOTO
Transport Package: Wooden Case
Origin: Shanghai, China
HS Code: 8413609190
WQ Series Submersible Fountain/Garden/Pond Water Pump is made up of motor and pump, which are separated through oil isolation room and mechanical seal, it is short in length that motor and pump share the same axle (rotor), the structure is compact.

Structure Features
1. Signal line: For motor power above 11kw, we suggest pump equipped with control box, which would protect the pump fully from leakage, phase reversal, short circuit, overheated, overload, etc.
2. Motor stator: Its insulation is B grade or F grade.
3. Water leakage probe. This component is installed in the oil room, if the mechanical seal was damaged, and water enters into the oil room, it will send out the signal to the control system so as to stop the pump.
4. Mechanical seal: Adopting in-series seal, the material is the wear-resisting carbonization tungsten, featuring being reliable, wear-resisting, longer life, etc.
5. Impeller: Have better handling capacity, can reduce the trouble of jamming and twisting of big fiber rubbish, etc.
6. Pump body: Harmonize with impeller, ensure the pump has high efficiency.
7. Seal rings: Installed at the mouth place of pump body, can change the sealed ring after long time operating, so as to ensure the pump runs with the best efficiency.

Advantages
1. Adopt big flow non-clog design, improving the ability to pass dirty things greatly.
2. The design is rational, with high efficiency, and the energy-saving is remarkable.
3. Adopts in series mechanical seal, the material is the wear-resisting carbonization tungsten, featuring being durable, wear-resisting, can running for more than 8000 hours continuously safely.
4. The structure of the pump is compact, small, may move conveniently, installation is simple and convenient, it is submerged into the water, no need to build the pump house, reduce construction cost greatly.
5. There is probe in the oil room of the pump, if the pump side mechanical seal is damaged and water enter into the oil room, it would give off signals so as to protect the pump.
6. Can be equipped with control box according to the needs of user, it will protect the pump from electric leakage, water leakage, overload and overheated, etc. Guarantee the pump operates reliably and safely.
7. The automatic coupling installation system of one pair of guides, it is convenient for the installation and maintenance of the pump, no need to enter into the sewage hole.
8. The float switch, according to the necessary water level changing. Control the start and stop of the pump automatically, no people needed to guard it.
9. According to use situation, the motor can adopt water jacket the-third party circulation cooling system type, which can guarantee the safe operation of the pump under the anhydrous (dry type) state.
10. Installation can be fixed automatic coupling installation or non-fixed portable installation, which can satisfy different occasions.

Working Conditions
1. Temperature 0f medium not exceeding 60º C, gravity 1.0~1.3kg/dm3, and pH value between 5~9.
2. For pump without internal gravity flow circulation cooling system, its motor above liquid surface by less than 1/3.
3. Generally, pumps shall be working within the range of head to protect the motor from overloading. To work at the full head. Please specify when placing an order for our convenience in manufacturing.
4. The current Of motor during the process of operation shall not exceed the rated current of motor.

Applications
This series of pumps are mainly used in municipal engineering, buildings, industrial sewage discharge, sewage treatment in environmental protection, factories and mines to deliver sewage, wastewater and rainwater etc, containing solid substances and long fibre. Stainless steel may also be used to deliver corrosive medium.

Specifications
Model Discharge (mm) Capacity (m3/h) Head (m) Power (kw) Speed (r/min) Eff. (%)
QW25-8-22-1.1 25 8 22 1.1 2900 38.5
QW32-12-15-1.1 32 12 15 1.1 2900 40
QW40-15-15-1.5 40 15 15 1.5 2900 45.1
QW40-15-30-2.2 40 15 30 2.2 2900 48
QW50-20-7-0.75 50 20 7 0.75 1450 54
QW50-10-10-0.75 50 10 10 0.75 1450 56
QW50-20-15-1.5 50 20 15 1.5 2900 55
QW50-15-25-2.2 50 15 25 2.2 2900 56
QW50-18-30-3 50 18 30 3 2900 58
QW50-25-32-5.5 50 25 32 5.5 2900 53
QW50-20-40-7.5 50 20 40 7.5 2900 55
QW65-25-15-2.2 65 25 15 2.2 2900 52
QW65-37-13-3 65 37 13 3 2900 55
QW65-25-30-4 65 25 30 4 2900 58
QW65-30-40-7.5 65 30 40 7.5 2900 56
QW65-35-50-11 65 35 50 11 2900 60
QW65-35-60-15 65 35 60 15 2900 63
QW80-40-7-2.2 80 40 7 2.2 1450 52
QW80-43-13-3 80 43 13 3 2900 50
QW80-40-15-4 80 40 15 4 2900 57
QW80-65-25-7.5 80 65 25 7.5 2900 56
QW100-80-10-4 100 80 10 4 1450 62
QW100-110-10-5.5 100 110 10 5.5 1450 66
QW100-100-15-7.5 100 100 15 7.5 1450 67
QW100-85-20-7.5 100 85 20 7.5 1450 68
QW100-100-25-11 100 100 25 11 1450 65
QW100-100-30-15 100 100 30 15 1450 66
QW100-100-35-18.5 100 100 35 18.5 1450 65
QW125-130-15-11 125 130 15 11 1450 62
QW120-130-20-15 125 130 20 15 1450 63
QW150-145-9-7.5 150 145 9 7.5 1450 63
QW150-180-15-15 150 180 15 15 1450 65
QW150-180-20-18.5 150 180 20 18.5 1450 75
QW150-180-25-22 150 180 25 22 1450 76
QW150-130-30-22 150 130 30 22 1450 75
QW150-180-30-30 150 180 30 30 1450 73
QW150-200-30-37 150 200 30 37 1450 70
QW200-300-7-11 200 300 7 11 1450 73
QW200-250-11-15 200 250 11 15 1450 74
QW200-400-10-22 200 400 10 22 1450 76
QW200-400-13-30 200 400 13 30 1450 73
QW200-250-15-18.5 200 250 15 18.5 1450 72
QW200-300-15-22 200 300 15 22 1450 73
QW200-250-22-30 200 250 22 30 1450 71
QW200-350-25-37 200 350 25 37 1450 75
QW200-400-30-55 200 400 30 55 1450 70
QW250-600-9-30 250 600 9 30 1450 74
QW250-600-12-37 250 600 12 37 980 78
QW250-600-15-45 250 600 15 45 1450 75
QW250-600-20-55 250 600 20 55 1450 73
QW250-600-25-75 250 600 25 75 1450 73
QW300-800-12-45 300 800 12 45 980 76
QW300-500-15-45 300 500 15 45 980 70
QW300-800-15-55 300 800 15 55 980 73
QW300-600-20-55 300 600 20 55 980 75
QW300-800-20-75 300 800 20 75 980 78
QW300-950-20-90 300 950 20 90 980 80
QW300-1000-25-110 300 1000 25 110 980 82
QW350-1100-10-55 350 1100 10 55 980 84.5
QW350-1500-15-90 350 1500 15 90 980 82.5
QW350-1200-18-90 350 1200 18 90 980 83.1
QW350-1100-28-132 350 1100 28 132 740 83.2
QW350-1000-36-160 350 1000 36 160 740 78.5
QW400-1500-10-75 400 1500 10 75 980 82.1
QW400-2000-15-132 400 2000 15 132 740 85.5
QW400-1700-22-160 400 1700 22 160 740 82.1
QW400-1500-26-160 400 1500 26 160 740 83.5
QW400-1700-30-200 400 1700 30 200 740 83.5
QW400-1800-32-250 400 1800 32 250 740 82.1
QW500-2500-10-110 500 2500 10 110 740 82
QW500-2600-15-160 500 2600 15 160 740 83
QW500-2400-22-220 500 2400 22 220 740 84
QW500-2600-24-250 500 2600 24 250 740 82

Glass Edging Machine

High-Class Glass Edging Machine,Glass Edge Polishing Machine,Straight Line Glass Edging Machine

Linyi Young Sunrising Machinery Co., Ltd. , http://www.huacaiglass.com