Winter maintenance of diesel generator sets

Introduction: In winter, when the temperature is low, starting a diesel engine can be difficult, and at the same time, the diesel engine wears, because at this time, the intake air temperature, the cooling water temperature, the lubricant temperature, the fuel temperature, and the temperature of the electrolyte in the battery are all corresponding. reduce. Therefore, the maintenance of diesel generators is very important.

Winter maintenance of diesel generator sets

Diesel generator set is a kind of small-scale power generation equipment, which refers to the power machinery that uses diesel fuel as fuel and uses the diesel engine as the prime mover to drive the generator to generate electricity. Diesel generator sets generally consist of diesel engines, generators, control boxes, fuel tanks, storage batteries for start-up and control, protective devices, and emergency cabinets. The whole can be fixed on the basis of positioning and can also be mounted on a trailer for mobile use.

Nearly 30% of the failures in the unit's failure to initiate repairs are: The unit has started a battery failure. For example, the battery is unmaintained for a long time, the electrolyte is not replenished in time after the water evaporates, the battery charger is not configured, and the battery has a long time. After the natural discharge, the power is reduced; or the charger to be used needs manual periodical equalization/floating charge switching, and the battery power does not meet the requirement due to negligence of the switching operation.

In addition, during daily inspections of diesel generators, it is difficult for non-professionals to find small traces, which usually lead to major failure of the unit and render it unusable. Wait until the emergency unit needs to start the unit to find out that the equipment cannot operate. Wait until the repair and maintenance personnel arrive at the site to judge the fault, determine the maintenance plan, and then begin to purchase the spare parts and repair it to the end. At least 10 days or a half month later, the loss caused has no result. Recall.

Aluminum Brazing Foil

Aluminum Brazing Foil is one of our strong product.Brazing technology is widely used in different areas.Such as automobile,industrial and household application.We use welding technology to weld the brazing layer and core layer together and process for hot rolling and cold rolling to the required thickness and heat treatment might also be required.Depending on the Aluminum Brazing Foil application.4343/3003/4343 is an alloy which is widely used.Sound quality is by good production,we have online surface scan and testing unit on our slitting machine even.

So that the Aluminum Brazing Foil delivered to clients end will be free of surface defects.

Trust in harmony,we care what our clients care.

Aluminum Brazing Foil,Industrial Aluminum Foil,Aluminium Foil Packaging,Aluminium Foil Roll Price

Trumony Aluminum Limited , https://www.szaluminumplate.com