SAIC and GM Sign Technology New Energy on 18th
Electronics Production Machinery
SF-580is a Automatic Lead Cutting And Bending Triode Forming Machine.Size:1500x1000x1500
1.Apply to LED/light emitting diode,Triode Forming Cutting Machine,aluminum electrolytic capacitor,metallic film capacitor,safety capacitor,quartz crystal and other upright type elements.
2. Import CAM mechanical transmission,precise stable,durable and low noise. Each part has the special hard coating with long service life.
3. The led Lead Forming Machine whole set of system is used PLC control with ultra strong stability.The operator interface is touch screen convenient and easy to lean and the data alignment is more convenient.
4. Speed control of the non-phase fine adjustment of transducer.
5. Upper clipand open clip system are rack and pinion type.The change of fixture centerline is invariant,no harm by clipping and more convenient to change the specification.(D4--(D6are shared the same fixture and(D8-(D10are shared the same fixture.
6. Molding pitch:2.0mm,2.5mm,5mm,7.50mm,10mm,15mm,20mm,25mm
7. Molding/feet cut method:odd leg,90℃bending,incurvature, excurvation and vertical angle,etc.
8. Length of feet cut:2.5mm-28mm.
9. Working pressure:4kg/Cm2
10.The special molding pattern can be customized according to the clients different requirements.
11. The equipment is anti-static.
The Bulk Resistor Radial Cutting Machine is suitable for shaping and cutting feet of various electronic components.Any details you want to know about Automatic Lead Forming Machine please contact us for further more.
Electronics Production Machinery SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.szsingsunautomatic.com
This is another in-depth cooperation between Shanghai Automotive and General Motors following the 50:50 joint venture between Shanghai Auto Hong Kong Investment Company last year.
General Motors has many mature technologies in new energy. Volt electric vehicles listed in many countries and regions have achieved good order performance and are planned to be introduced into China.
GM also showed its thinking on future traffic at the Shanghai World Expo and tried to provide a feasible solution. On March 24, GM debuted the EN-V electric concept car in Shanghai. It can travel about 40 kilometers on a single charge and the car networking becomes the latest application. This zero-emission and zero-traffic car is expected to be seen on the road in 2030.
Shanghai Automotive is developing InkaNet 3G technology, which is in common with the universal car network, and the cooperation will be more beneficial to the advancement of Shanghai automotive technology.